99345hp

I know you like radical thinking, and you have alot of knowledge about the suspension limitations on these cars. This is my first try at photoshop, so I dont know really how to do much on that program.

To my question. Could this stance be done with just bags? I havn't spent too much time checking out everything that is available for these cars, so I was just wondering.

99Bluz28

iTrader: (35)

I've got a A.R.T. coolride kit in the rear of my camaro, and this is as low as the rear goes without any other mods. (FYI, I don't have airbags up front). 18" wheels with 275/40/18 tires

99345hp

well, that is low, but I will have to figure out what else it will take to tuck the wheels. Is it sitting on the bumpstops? When I finally get to this I guess I will take the springs all the way out of the car and see whats in the way.

99Bluz28

iTrader: (35)

Yeah, it's sitting on the bump stops(cut down 1" shorter per A.R.T. instructions), actually Now it's 1-1/8" to 1-1/4" shorter now with the E.S. cut-down bump stops.

ae13291

iTrader: (8)

that airbag set up is pretty bad *** but isent there other things to watch out for? like the brake lines or wires connected to the diff?

99345hp

I guess when I get to the point where I can tear the car down, then I will look at what it takes to get that slammed stance. anyone know if there is a thread about the one camaro that is down in the weeds??