Sphon 25mm rear sway bar
11-17-2008, 11:24 PM
#1
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Nov 2006
Location: Fresno, California
Posts: 1,985
Likes: 0
Received 0 Likes
on
0 Posts
Sphon 25mm rear sway bar Hey all looking for something beefy for my rear sway to keep me straight, wanted to know if the 25mm sphon piece will fit on a moser 9 inch rear. Thanks all!
11-19-2008, 01:25 PM
#3
A 9" requires an adapter kit to fit a GM or GM style replacement bar. I don't have the adapter kits. But we do have bars. In fact we have more than a few choices in 1" rear bars (and a couple are hollow too, which saves you about 8-9 pounds as well). The 1" bars are not shown on my website, as I don't normally sell them (too much for handling, better for more drag racing). But we do have some options there if you'd like to talk about them.
__________________
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
11-19-2008, 05:55 PM
#4
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Nov 2006
Location: Fresno, California
Posts: 1,985
Likes: 0
Received 0 Likes
on
0 Posts
Sure thing Mr. Strano, what do you have exactly? I'm looking at the Sphon because its dirt cheap but Ive been more than happy with my Strano stuff, just going in a different direction.
11-19-2008, 06:04 PM
#5
Well we have a hollow 1" bar. Can do Hotchkis 1" rear bar... and various solid bars (read cheaper) from Addco, Suspension Techniques and a few others.
I'm glad you've been happy with my parts, and understand you are going a "different direction", but there isn't any reason I can't help you with the new direction either.....
I'm glad you've been happy with my parts, and understand you are going a "different direction", but there isn't any reason I can't help you with the new direction either.....
__________________
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
11-20-2008, 04:53 PM
#6
TECH Fanatic
iTrader: (9)
Join Date: Apr 2008
Location: Tampa,Florida
Posts: 1,073
Likes: 0
Received 0 Likes
on
0 Posts
The bar you might be looking for would be our XSB001 Extreme anti rollbar. It clears fine on any aftermarket 9" housing. You are looking for a street/strip type setup?
BOSS APPROVED!
