Help with new shock and spring install.
#1
Help with new shock and spring install.
Hey guys, I picked up some new shocks and springs, and had a few questions before I get into it.
First, where does this washer and, cap? Go in the assembly? Really can't quite figure it out just looking it over
Second is how far down should the nut on the top of the shaft be tightened. Just til 33 ftlbs?
And lastly, do I need to load the suspension to torque the new assembly in?
Thanks to any and all help.
First, where does this washer and, cap? Go in the assembly? Really can't quite figure it out just looking it over
Second is how far down should the nut on the top of the shaft be tightened. Just til 33 ftlbs?
And lastly, do I need to load the suspension to torque the new assembly in?
Thanks to any and all help.
#2
I just did this install. These two links may be useful to you:
https://ls1tech.com/forums/suspensio...-6-5-15-a.html
https://www.ls1howto.com/index.php?article=6
https://ls1tech.com/forums/suspensio...-6-5-15-a.html
https://www.ls1howto.com/index.php?article=6
#3
LS1Tech Premium Sponsor
iTrader: (40)
^ this. The first thread I have bookmarked and send to many of my customers who are installing new shocks/springs in the front of their car. Excellent info provided by a member here
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!