trik396

iTrader: (4)

Hello everyone. I will soon be taking delivery of a 2000 TransAm WS6. It's a 6 speed car (Tick stg2) and forged 346 making 460/440 at rear wheels. The only thing previous owner hadn't done was any suspension work except for an Edelbrock torque arm. I'm thinking bolt in subframe, lower control arms, tunnel brace. Any recommendations or additions are appreciated. Who likes what and why? I'll be installing in my garage with car lifted on jackstands so any other hints would be nice.
Thanks
Tony

camaro816

depending on budget koni's or bilstiens do your research on the forums there is more than enough info and helpful vendors. Also be careful with the power with a stock tranny and rear bc it with explode with decent tires and abuse. Just remember you can have 900hp under the hood but without a tranny and rear it doesnt move.