no rear brake after 9" install
06-16-2010, 04:37 PM
#1
TECH Regular
Thread Starter
iTrader: (63)
Join Date: Oct 2006
Location: topeka kansas
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
no rear brake after 9" install sup yall's i have a 98 trans am i just put the moser 9" and i got everything put back together and blead the rears i have no rear brake. abs inop light is on. car was a 3 channel car. anyways when i push the pedal down it stops about half way down. doesn't slowly stop. it feels like something else is stopping it. i checked to make sure nothing was hitting the brake pedal arm. it was clear. anybody have an idea? thanks ahead of time for any help.
- Scottie
- Scottie
06-17-2010, 05:34 PM
#2
Make sure you didn't kink a hard brake line while doing the install. Also make sure the rear junction point (splitter) for the brake lines will clear the body of the car through the entire travel of the suspension. On my Moser it was pretty close when the rear suspension was bottomed out.