Custom Made VT rear Spring seat isolators !! Any Interest???
#63
Teching In
Join Date: Jun 2010
Location: Springfield, MO
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Could you PM me a quote on what it would cost total to have a set sent to the US zip code of 65781? I'm about to do a total suspension swap and this heater hose alternative could be one of the last pieces of the puzzle for me.
#66
Yeah I had a few more left I ended up selling my ss and had a few pairs in my trunk of the car I forgot about. I still have some left I'm keeping one pair for myself because I'm planning to get back in an fbody.
Here was a pic of my ss. I miss it dearly.
Here was a pic of my ss. I miss it dearly.
#71
All pm'd returned and all sets paid for mailed!! I apologize for not pm'ing everyone back individually I got so many pms this week it was hard for me to match forum Ids with PayPal payments!
I have ONE pair left and I spoke with my contact about making more for me. I've gotten a lot of positive feedback from this forum and I thought about dropping a deposit for more and I thought my wife would use the Veto on me since we just had our 2nd little one and she's off work atm.. Surprise surprise she said go for it! I will know Monday about getting more
Thanks for the support !
I have ONE pair left and I spoke with my contact about making more for me. I've gotten a lot of positive feedback from this forum and I thought about dropping a deposit for more and I thought my wife would use the Veto on me since we just had our 2nd little one and she's off work atm.. Surprise surprise she said go for it! I will know Monday about getting more
Thanks for the support !
#76
No these are for replacing the big stock rubber isolators on the top of the spring. I think I mentioned it earlier but I was thinking to try and make a isolator for the bottom that would keep new springs from having to sit on rusty axles. I'll look into it! Maybe I'll call them VT iso-seats !
#77
Interested in the bottom spring perch VT! Options for thickness would be nice too... Another member here used transmission washers stacked to raise the rear spring a bit and used HD zip ties to secure everything since the spring perch lip is quite shallow. I like the VT idea for the added NVH isolation properties!
#80
Pms replied. I have all the new ones I ordered as well so no more worries about running out (sorry for the wait Dennis !)
ANyhow I have been looking into the lower perch as well. If I had something made it wouldnt be as thick as my uppers for obvious reasons (the lip being a certain height on the axle). This has been something Ive hated about installing brand new springs on a rusty old axle. especially since theyre all powdercoated so nicely. Trying my best to figure something out for that.
ANyhow I have been looking into the lower perch as well. If I had something made it wouldnt be as thick as my uppers for obvious reasons (the lip being a certain height on the axle). This has been something Ive hated about installing brand new springs on a rusty old axle. especially since theyre all powdercoated so nicely. Trying my best to figure something out for that.