703 CAMAROSS

I was swapping my k member into my car and broke a line in the process. I know its 3/16th but don't know the flare/ fittings required. So here's my questions.
1. What fitting screws into the rubber line to the caliper?
2. What fitting screws into the abs block?
3. What flare is on the end where it connects to the caliper?
4. What flare is on the end where the line connects to the abs block?
If you guys could help me with this I'd appreciate it.Its a 2000 Camaro

703 CAMAROSS

I'm assuming its a bubble flare is this correct?

703 CAMAROSS

Bump it up

libertyforall1776

iTrader: (2)

Sorry, don't have the details you want but these outfits may be of help:

http://www.classictube.com/products/...ing-automotive

http://www.flynbye.com/catalog/c3_p1.html

703 CAMAROSS

Thanks I took a guess and it was a bubble flare and an M10x1.0 on both ends, 3/16th line. I hope this helps someone in the future