LS1TECH - Camaro and Firebird Forum Discussion - Moving the torque arm mount to the crossmember

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)

- Suspension & Brakes (https://ls1tech.com/forums/suspension-brakes-16/)

- - Moving the torque arm mount to the crossmember (https://ls1tech.com/forums/suspension-brakes/184141-moving-torque-arm-mount-crossmember.html)

99HUGGSS

06-19-2004 05:47 PM

Moving the torque arm mount to the crossmember

Do any of you guys and gals know what you have to do to mount the torque arm to the trans. crossmember instead of the trans.? I have seen a replacement crossmember, but I can remember where. I am running long tubes with an x-pipe so I have to keep it on the crossmember. Thanks in advance!!!

Smitty

06-19-2004 08:44 PM

Yank >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

99HUGGSS

06-19-2004 08:53 PM

Thank you very much, that is just what I needed.

02SOMWS6

06-19-2004 09:44 PM

Thats great,my tq arm from BMR is only rated for 11.0 By the end of this fall when the temp drops I'll be going 10.9 on engine and 9.? spraying so I'm gonna need this upgrade, thanks
:hail:

All times are GMT -5. The time now is 10:36 AM.