UMI Tech

We have this bushing (of course) and also have a Turn One pump. After 28 laps of Share the Ride in 90 degree Atlanta heat last week, the steering felt the same on lap 28 as on lap 1. The Turn One pump is a game changer and is basically bullet proof. Good stuff.

ramey

rickscamz28

whats the labor time on the bushing?

ChrisSingh90

iTrader: (12)

Motor has to raise in order to get the rack bolt out and the bushing replaced?

Guess I'm going to wait until I do my H/C before I tackle this. I have ARH 1 7/8" headers with energy suspension motor mounts, and there's no way I'm going back in there and loosening motor mounts, lol.

Chris

UMI Performance

iTrader: (77)

Like mentioned, the installation depends on the rack bolts. We did ours when the front end was apart for a new k-member so it was easy.

_JB_

iTrader: (33)

Is $49 for one or two bushings? I'm about to rebuild the front end and I'll probably swap bushing(s) at the same time. From what I can tell the driver bolt is solid, while the passenger has the rubber bushing, so I only need one?

UMI Performance

iTrader: (77)

Correct, you only need one set for $49. The other side of the rack is solid and does not require a bushing.

I hope that helps.

_JB_

iTrader: (33)

Cool, thank you sir! Order placed.

Mike Morris

iTrader: (55)

Damn I just swapped my rack