flozram

Gentlemen,
I call to suspension experts,I need your help
I will have my car on a hoist doing Koni shocks and a Panhard bar
I ordered a BMR Bar from APE (which we all know was a mistake)
and havent gotten it and dont expect to.
Now I need this work done by this weekend and the guy whos doing it for me
can do it later today or tomarrow
which leads me to my question:

IS anybody familiar with the Edelbrock adjustable Panhard Bar?
It looks cool Greasable fitings poly/graphite bushings
Ramcharges has em in stock so i could have it today
otherwise i have to see if Livernois has a BMR in stock

please give me your thoughts as i need to figure this out today
Thanks
Rob

chupr0kabra

iTrader: (10)

I'm not familiar with it, but it looks like a good piece. If you're really in a time crunch and you can get it locally for a decent price, go for it. I didn't need one right away, so I was able to shop around and found my BADZ bar for a really good price. Aside from poor initial installation on my part, it has been a very good piece.


-Mike

ACW

Please post info about your order in https://ls1tech.com/forums/removed-locked-thread-graveyard/318551-old-ape-late-order-short-list-updated-5-9-05-a.html to get added to the list of people who APE owes

HBHRacing

I have an eldelbroke TQ arm on my car. It's adequate, but it's not in the leauge of Spohn and BMR. Mostly because it's not adjustable and mounts to the tranny. But it was a good deal so I got it. That being said, panhards don't seem to very as much as TQ arm design. I would rather have a nice chrome moly adjustable BMR but if your in a hurry I don't see why the edelbrock wouldn't work for you.

YellowToy/A

iTrader: (1)

You do not need a lift to do that job. Shop around for a spohn. Get one side adjustable. Get a rod end on one side get a poly on the other. I got mine at speed eng they will give some on the price. When I ordered I got in two or three days.