front control arm poly bushing install HELP! (pics)
07-11-2005, 09:14 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Dec 2004
Location: Centreville, VA
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
front control arm poly bushing install HELP! (pics) I got the poly bushing in the upper control arms no prob, but on each lower control arm the vertical bushing does not fit!!! There seems to be a sleeve in the hole that can be taken out and they would fit, is this sleeve supposed to come out... look at these pics so you can understand it better...
07-13-2005, 03:22 PM
#3
Just a shot in the dark...but do you have the bushing kit for the LT1 or LS1 arms? I know the A-arms have different part #s for 93-97 and 98-02. I don't know what the physical differences are though. I do have the Prothane kit at home, I'll take a look at the instructions they sent to see if it mentions removing the sleeve.
