How much back spacing/tubbing
11-18-2002, 11:32 AM
#1
TECH Senior Member
Thread Starter
iTrader: (18)
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes
on
0 Posts
How much back spacing/tubbing How much backspacing and other stuff would i need to run a set of 17x11.5-12.5 rims, would i need to tubb it out or could i get a lot of backspacing
<small>[ November 18, 2002, 10:03 PM: Message edited by: stang killer ]</small>
<small>[ November 18, 2002, 10:03 PM: Message edited by: stang killer ]</small>
11-19-2002, 05:27 AM
#3
Staging Lane
Join Date: Aug 2002
Location: NY
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much back spacing/tubbing <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> 17" x 11" (+50mm) offset this will get you in 315s with out any other mods unless you are lower then stock then you might need a APHB
<small>[ November 19, 2002, 05:29 AM: Message edited by: NUTBUTER ]</small>
<small>[ November 19, 2002, 05:29 AM: Message edited by: NUTBUTER ]</small>
11-20-2002, 02:03 PM
#6
TECH Senior Member
Thread Starter
iTrader: (18)
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much back spacing/tubbing Its just that I saw taht the fikses were available in 11.5, 12, and 12.5 and wanted to know what the biggest that I could go <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
11-20-2002, 02:07 PM
#7
Re: How much back spacing/tubbing 11s are the largest you can run with out any modification on a stock ride height car. Lowering and/or going wider will result in the rolling of the fender lip, beating the innerfender in with a BFH, and an eye on the LCAs. Good luck!
Trending Topics
11-20-2002, 07:57 PM
#8
TECH Senior Member
Thread Starter
iTrader: (18)
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much back spacing/tubbing you think ill be able to handel 17x11's with the G2's <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
11-20-2002, 09:45 PM
#9
Re: How much back spacing/tubbing Yup, They will fit. Ill *try* to snap some pics of my cars rolled fenderlip. They will fit, but once you get them, you will know exactly what to do. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
