Ta9864dodge

iTrader: (9)

My car is lowered and there are 2 holes to put the aftermarket lower control arms into the lower control arm relocation brackets. It says use the closest to the ground but they look like they would be straight if I used the top hole.
With the car on the ground are they supposed to be straight or angled down?

Ta9864dodge

iTrader: (9)

Where is all the help, I searched but everyone says take the lowest hole is that right if the control arms are pointed downward?

Viper

iTrader: (6)

Try them both, it's only 10 minutes to make the switch.

FWIW, I used the lowest hole , but it all depends on spring rate and LCA angle.