K Member Installation
Thread Starter
TECH Enthusiast
iTrader: (10)
Joined: Jan 2006
Posts: 527
Likes: 0
From: Long Island, NY
K Member Installation How long would it take to install an aftermarket K member (ex. BMR)? and what is the difference between a tubalar one and boxed ones (if they make boxed ones for the k member). which is better. thanks
Thread Starter
TECH Enthusiast
iTrader: (10)
Joined: Jan 2006
Posts: 527
Likes: 0
From: Long Island, NY
i'm not looking to go like 10 seconds or anything like that. So i guess tubular would be better. whats the average installation time. and what is involved. thanks.
Working steady you can do a K-Member swap in 6-8 hours. It requires you to strap the motor in the vehicle and drop the front suspension including the K-Member out from the bottom and install the new one. Its not a bad installation at all.
We offer a very nice set-up that will easily with stand a 10 second car as well as all your street driving, it can be see here www.umiperformance.com/2320.aspx and here www.umiperformance.com/2325.aspx
If you would like a more detailed run down of what is involved please give us a call at 814-857-5400 and ask for Jerry. He will be glad to discuss what you will get into.
If you have any questions please ask. Thanks!
Ryan
We offer a very nice set-up that will easily with stand a 10 second car as well as all your street driving, it can be see here www.umiperformance.com/2320.aspx and here www.umiperformance.com/2325.aspx
If you would like a more detailed run down of what is involved please give us a call at 814-857-5400 and ask for Jerry. He will be glad to discuss what you will get into.
If you have any questions please ask. Thanks!
Ryan
