jimmyblue

iTrader: (11)

Figuring I'd get some Earl's stainless lines to do this
(got the Bishop brackets, got a line on some 'vette
calipers, have to get rotors/pads). But don't know if
there is anything funny about hoses for mix-n-match
or if the Camaro part number is good to go. Anybody
know about that?

Kewl_Blades

iTrader: (5)

Should be good to go.
It will work with the stock rubber lines.
As long as the SS lines are the same length or longer, you'll be fine.

speed_demon24

iTrader: (6)

I don't know how the LT1 lines compare to the LS1's, but the LT1 lines are too short, I went with the C5 front SS lines.

trackbird

iTrader: (4)

You should use the Corvette parts for that kit. The stock F-body hose is shorter and could be stretched when the steering is turned to full lock.

The parts list is here:

http://www.frrax.com/rrforum/index.php?showtopic=8196