Which Sponsor would be best??????
#1
Which Sponsor would be best??????
I have a 2000 Z28 and im going to do a complete under-car-overhaul, starting next week. Which sponsor do you think would have the best deals and carry everything I need. I want to do a one stop shop because some of this stuff is going to be pretty expensive. Heres what I got so far, let me know if I forgot anything.
Complete Bolt-in 9" or Dana 60
Panhard Bar
Lower Control Arms
Lower Control Arm Relocate Brackets
Drive Shaft (700-800 hp)
Sub Frame Connectors
Bullet Proof 6 Speed
Torque Arm with Loop
Don't really care what brand of parts I use as long as its MADE IN THE USA
Complete Bolt-in 9" or Dana 60
Panhard Bar
Lower Control Arms
Lower Control Arm Relocate Brackets
Drive Shaft (700-800 hp)
Sub Frame Connectors
Bullet Proof 6 Speed
Torque Arm with Loop
Don't really care what brand of parts I use as long as its MADE IN THE USA
#3
TECH Addict
iTrader: (2)
why does it matter if you get it all from one place?
if your main concern is to save as much money as possible, i'd:
1) do some research and find the exact parts you want
2) find all the sponsors who have those exact parts
3) choose the places that have them for the best price (be sure to include shipping estimates in the price).
doing this, you should be able to save a good amount of money over buying everything at one place.
if your main concern is to save as much money as possible, i'd:
1) do some research and find the exact parts you want
2) find all the sponsors who have those exact parts
3) choose the places that have them for the best price (be sure to include shipping estimates in the price).
doing this, you should be able to save a good amount of money over buying everything at one place.
#7
12 Second Club
iTrader: (6)
I would say Sam Strano can do most of it, although the bullet proof 6-speed would be better from sixspeedsinc.com : https://ls1tech.com/forums/manual-transmission/821992-1-wk-only-pri-special-free-shipping.html
Complete Bolt-in 9" or Dana 60
Panhard Bar
Lower Control Arms
Lower Control Arm Relocate Brackets
Drive Shaft (700-800 hp)
Sub Frame Connectors
Bullet Proof 6 Speed
Torque Arm with Loop
Complete Bolt-in 9" or Dana 60
Panhard Bar
Lower Control Arms
Lower Control Arm Relocate Brackets
Drive Shaft (700-800 hp)
Sub Frame Connectors
Bullet Proof 6 Speed
Torque Arm with Loop
Trending Topics
#9
LS1Tech Premium Sponsor
iTrader: (26)
I have a 2000 Z28 and im going to do a complete under-car-overhaul, starting next week. Which sponsor do you think would have the best deals and carry everything I need. I want to do a one stop shop because some of this stuff is going to be pretty expensive. Heres what I got so far, let me know if I forgot anything.
Complete Bolt-in 9" or Dana 60
Panhard Bar
Lower Control Arms
Lower Control Arm Relocate Brackets
Drive Shaft (700-800 hp)
Sub Frame Connectors
Bullet Proof 6 Speed
Torque Arm with Loop
Don't really care what brand of parts I use as long as its MADE IN THE USA
Complete Bolt-in 9" or Dana 60
Panhard Bar
Lower Control Arms
Lower Control Arm Relocate Brackets
Drive Shaft (700-800 hp)
Sub Frame Connectors
Bullet Proof 6 Speed
Torque Arm with Loop
Don't really care what brand of parts I use as long as its MADE IN THE USA
i use Aurora (made in USA) heim joints, and every component i sell is produced of USA steel right here in my shop.
i also have the BEST prices.
SixSpeeds Inc on that trans.
Last edited by ssvert99; 12-03-2007 at 10:13 AM.