Alignments, Suspension, Scaling, Corner Balancing -- All In-House
 

As some of you may know, we have a brand new SNAP-ON John Bean VD31 Visualiner Aligner Machine on-site. Our suspension guru, Jay, is not just another robot for the alignment program. Jay knows the inner workings of general suspension systems, and advanced knowledge with Porsche, Mercedes, Ford, & GM suspension systems. With numerous T1/SCCA Porsche road race cars under his belt, we are confident in bringing all of our suspension services to the public.

Here are some of our new services including pricing:

Snap-On VD31 Aligner: Custom Alignments setup for Road Race, Street, Strip, Auto-cross, Standing Mile, Etc.
- All vehicles, capability for 2/4-wheel alignments.
- Cradle Alignments for 04-06 GTOs

Intercomp LCD w/ Printout Scales
- 4 Corner Individual Weights with Full Vehicle Weight
- Capability to corner balance any vehicle depending on application.
- Before/After printouts of corner balance reports.

Full Custom Suspension Items
- All suspension items are bent & TIG'd in-house.
- 4130 and M/Steel applications
- F-Body jigs are already in the making - Rear lower control arms, panhard bar, torque arm, front a-arms upper/lower, k-member, sfcs, stbs, etc.
- Powdercoating

On-Site Race Track Tuning
- For the serious enthusiast!
- Even though Jay can work his magic in-house here, there is nothing like tuning in the real world environment. Jay is available for on-site road race or drag strip tuning.

Labor Rates:

Alignment: Labor is at our normal labor rate of $95/hour. Included for rack time and inspection.

Scaling (Just Vehicle Weight): $125.00

Corner balance labor is also at our normal labor rate of $95/hour
- Scale Setup Fee: $50.00

F-Body Suspension Items: Public sale not ready yet. In-House items call for pricing

On-Site Tuning: Rates based on per job basis. Discounts given for current customers.

Now if I could just find a service like this around where I live...if I was closer to you, I'd be all over this.

so what would be the price for an adj. PHB install and autox alignment on an f-body?

Alignments are all per hour jobs. Depends on what is adjustable, coilovers, etc. on your suspension is how far we can go.

The adjustable panhard we could do a few ways:

In 4130 "Chromemoly" Tubing:

Double Adjustable with Spherical Rod Ends @ Both Ends, Powdercoated: $175
Install Panhard Bar: Complimentary
Alignment: Figure 2-3 hours at least @ 95/hour -- $180-275