Car sits 3/4 inch higher with dana 60 rear Like my title says since my strange dana 60 install the rear of my car sits 3/4 inch higher in the rear than it does in the front. I still have stock springs, panhard bar and torque arm on the car. Any ideas would be appreciated. |
take off the rear spring isolator. it should be good for about a 1/2". |
It is to be expected with a rear that big. Removing the rubber isolator would be first on the list of things to do if you don't plan on changing the springs on all four corners with those of the lowering variety. |
Thanks for the input, I'll try it tomarrow. |
pm sent |
whats the pm about? I have a 12 bolt and have the same problem. I am thinking about doing the heater hose mod very soon |
mine is getting the dana s60 installed right now and im worried lol i have eiback sportlines and would like to know how the rear will sit |
the axle tubes are bigger then stock thats why it sits higher |
Trim the coil springs |
All times are GMT -5. The time now is 09:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands