F-body Rolling Race Car Chassis
01-25-2010, 11:20 PM
#1
F-body Rolling Race Car Chassis Perfect for someone looking for a race car build or wanting to transfer everything from an existing car to a better chassis.
1993 Transam.
Cage was built by Bill Buck Race cars in Austin TX.
10 point Chrome Molly Cage built by Bill Buck
Pin on parachute mount built by Bill Buck.
Sub frame connectors built by Bill Buck.
Pontiac push pull switch by Bill Buck.
Stroud window net.
Madman A/C delete panel.
Madman mini tubs.
Madman 150lb rear springs. (not installed)
Wolfe Rear Spring adjusters. (not installed)
Percy's speed glass front and rear.
Kirky Pro street seats with black covers.
Cowl is cut out.
Stock parts include: Stripped dash, gauge bezel, sill panels, A pillar panels, B pillar panels, headliner, 97-02 tail light housings.
Keep in mind this car was striped down to build a race car out of. The car has no wiring. We were going to build our own car harness. The brake Booster is gone because we were going to change it out and it has no stock hood because we were going to a pin on hood.
Car has clear title as well.
Doors have no internals or glass.
There is currently a Little over 6500 in the car. Selling for 3500 you can not do what this chassis has done already for this amount. Its done right and you save the hassle.
I will also concider trades for any of the following.
Gas powered gold cart, ATV, Verticle Mill, Hydraulic Metal Sheer, Aluminum welder, Lathe.
Just rinsed the Dust off for pictures. Pictures are not the best..
You can call me at the shop 254-848-4300
Dave
1993 Transam.
Cage was built by Bill Buck Race cars in Austin TX.
10 point Chrome Molly Cage built by Bill Buck
Pin on parachute mount built by Bill Buck.
Sub frame connectors built by Bill Buck.
Pontiac push pull switch by Bill Buck.
Stroud window net.
Madman A/C delete panel.
Madman mini tubs.
Madman 150lb rear springs. (not installed)
Wolfe Rear Spring adjusters. (not installed)
Percy's speed glass front and rear.
Kirky Pro street seats with black covers.
Cowl is cut out.
Stock parts include: Stripped dash, gauge bezel, sill panels, A pillar panels, B pillar panels, headliner, 97-02 tail light housings.
Keep in mind this car was striped down to build a race car out of. The car has no wiring. We were going to build our own car harness. The brake Booster is gone because we were going to change it out and it has no stock hood because we were going to a pin on hood.
Car has clear title as well.
Doors have no internals or glass.
There is currently a Little over 6500 in the car. Selling for 3500 you can not do what this chassis has done already for this amount. Its done right and you save the hassle.
I will also concider trades for any of the following.
Gas powered gold cart, ATV, Verticle Mill, Hydraulic Metal Sheer, Aluminum welder, Lathe.
Just rinsed the Dust off for pictures. Pictures are not the best..
You can call me at the shop 254-848-4300
Dave
Last edited by Nitro Dave's Nitrous Outlet; 03-05-2010 at 12:39 AM.
01-26-2010, 08:59 AM
#4
The cage will pass certification. However It has not been taking to be certified yet. You normaly do that closer to finishing the car. Certification has to be renewed over a period of time so no need to certify it until you are closer to finishing the car.
01-26-2010, 11:02 AM
#6
TECH Enthusiast
iTrader: (4)
Join Date: Jul 2003
Location: Beaumont, TX USA
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Stock crossmember & rear? Really looking for another Camaro but liking this deal. May call tomorrow if I get a chance too. Work gets in the way sometimes. HaHa
Trending Topics
01-29-2010, 08:22 AM
#12
Honest the car could go either way. The race car mode would obviosly be less painful and cheaper.
Dave
