Color Matched Front End I started last night by taking the grill and bumper cap off and started prepping them. Woke up early this morning and took the bumper off and began prepping it. The bumper was in really bad shape. It had 2 very large dents. 1 dent was bad enough to crease the bumper horn in. I was able to repair both almost 100%. I also recently replaced the hood because it was damaged pretty badly. All of the damage was done before i got the truck. I still have to replace the passenger side bedside and do some work on the cab but that will be done once i get another vehicle so i can tear this thing down. All of this is temporary because the truck is getting the 03-05 front end right before i repaint the whole truck. There was never a bumper valence on the truck when i got it so i have to go pick one up this week. Once that is all said and done i think it will look great. Overall im pretty happy with the progress i made today. The chevy emblem will be going on tomorrow after i get some black paint. Sorry about the bad pics i finished late. I will get some better pictures tomorrow. Before: http://img814.imageshack.us/img814/9617/photo5oy.jpg http://img185.imageshack.us/img185/857/photo8am.jpg After: http://img411.imageshack.us/img411/4854/photo3poz.jpg http://img801.imageshack.us/img801/1887/photo2jr.jpg http://img295.imageshack.us/img295/2503/photo1gr.jpg |
Looks great ! |
i think you did a good job lining everything up as close as possible with what you had. its nearly impossible to get it exactly as it left the factory once its been given a good whack. thats unless you spend a lot of extra time and $$ to replace everything and measure every little gap. |
Originally Posted by ex-SS-ve
(Post 13828444)
i think you did a good job lining everything up as close as possible with what you had. its nearly impossible to get it exactly as it left the factory once its been given a good whack. thats unless you spend a lot of extra time and $$ to replace everything and measure every little gap. |
What type of paint/gun are you using? I have some damage to my Z caused by a breakin. Was going to do shaved door handles but if I did, I couldn't get an inspection. Just plan on stripping it down, fixing all the dings and so on, then having someone spray the whole truck. Truck is kind of oppisite though. Have a 6" RCD lift sitting in the garage, then looking towards some 35's. |
damn, i really like those Silverados. sick truck dude. |
Looks great |
looks good- gonna look even better with that new front end tho= |
Originally Posted by redz_02
(Post 13829612)
What type of paint/gun are you using? I have some damage to my Z caused by a breakin. Was going to do shaved door handles but if I did, I couldn't get an inspection. Just plan on stripping it down, fixing all the dings and so on, then having someone spray the whole truck. Truck is kind of oppisite though. Have a 6" RCD lift sitting in the garage, then looking towards some 35's. Thanks everyone! |
i should deff take pics of my friends silverado. its a white single cab with the whole hd conversion dropped super low to the ground with a intimidator wing. looks fukkn sick. |
Originally Posted by carlos sauceda
(Post 13831386)
i should deff take pics of my friends silverado. its a white single cab with the whole hd conversion dropped super low to the ground with a intimidator wing. looks fukkn sick. |
All times are GMT -5. The time now is 03:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands