Another Viper
Thread Starter
TECH Enthusiast
iTrader: (6)
Joined: Mar 2003
Posts: 612
Likes: 0
From: Irving Tx 75060
Another Viper This client was referred to me by the other black Viper I completed not long ago. He had a major stripe issue where a previous detailer ran his buffer over them and it discolored them severely. The car is black with flat black stripes so it almost "brightened up" a few spots making it noticeable. They had a lot of water spotting on them but Meguiars M40 cleaned those up no problem but didn't take care of the discoloration. He plans on still replacing them.
This detail was fairly simple, ONR wash, decon, and a "one step" light correction/protection (two passes). Perfection was not on the agenda today but simply to remove a fair amount of swirling, enhance the shine, and protect the finish. And here we go.
The tools on the agenda today. ORIGINAL PC and Griot's 3" DA.
The finish had tons of random strikes. The MF/D300 took care of those with ease.
I was sad to hear another local detailer who I know left this like this.
CarPro Eraser took care of that no problem.
TAPE MONSTER:
And now the afters. Again, perfection isn't what we were focused on here for this detail.
Here you can see where the previous detailer taped the striping but struck it enough to leave some markings.
Questions/Comments always welcome.
Thanks for checking it out!
This detail was fairly simple, ONR wash, decon, and a "one step" light correction/protection (two passes). Perfection was not on the agenda today but simply to remove a fair amount of swirling, enhance the shine, and protect the finish. And here we go.
The tools on the agenda today. ORIGINAL PC and Griot's 3" DA.
The finish had tons of random strikes. The MF/D300 took care of those with ease.
I was sad to hear another local detailer who I know left this like this.
CarPro Eraser took care of that no problem.
TAPE MONSTER:
And now the afters. Again, perfection isn't what we were focused on here for this detail.
Here you can see where the previous detailer taped the striping but struck it enough to leave some markings.
Questions/Comments always welcome.
Thanks for checking it out!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
Thread Starter
TECH Enthusiast
iTrader: (6)
Joined: Mar 2003
Posts: 612
Likes: 0
From: Irving Tx 75060
Thank you sir!
They were in pretty good shape alright. I lightly polished them up in some spots that had some water spotting.
Thank you good, sir. Did that fella ever get in touch with you? Sent another your way about 3 days ago.
They were in pretty good shape alright. I lightly polished them up in some spots that had some water spotting.
Thank you good, sir. Did that fella ever get in touch with you? Sent another your way about 3 days ago.
![6']['9's Avatar](https://ls1tech.com/forums/customavatars/avatar7527_3.gif){kind=avatar}
Thread Starter
TECH Enthusiast
iTrader: (6)
Joined: Mar 2003
Posts: 612
Likes: 0
From: Irving Tx 75060
As for polishing wheels, I do.
I think the same thing, but have also considered getting it detailed. I have a LOT of clear coat scratches, and a few deep ones. I know the clear coat scratches could be fixed, but I've considered repainting it too.
Well hard to tell from my pictures but my factory ss hood has the clear coat/paint spotting on it. I think the coating peeled off or something. I heard it is a factory defect. PM me what you charge for wheels. I have been meaning to do mine.