DFW...what's your setup?
 

there's been a lot of talk about the DFW guys lately being behind Houston. it's got me interested/wondering what the level of modification the LS1 cars up here are at. seems like every grama in houston has a heads/cam LS1 car. so what are some of you DFW guys setup on your car? Heads (what kind?) cam (specs?) a4/m6 gears, converter, bottle no bottle etc etc....if you're willing to share your setup then post up.

Enough to run with alot of guys, not enough for some.............My heads, 231/237 cam, all the bolt ons. !AC, !AIR, !EGR, !Weight. 4.10 gears in the 10 bolt, spec 3. Around 435-440 whp and 3150 lbs.

Brandon

Lid, Mac Midlenths, Borla, B&M shifter, Badz lower control arms, BMR relocation brackets, full weight, lowered with stock shocks. :drive:

Tr230, lt's, duals, and all the other bolt ons .... puttin down 395/377.

new rebuilt shortblock
custom cam
double roller
stock heads
ram powergriphd clutch
spohn lcas
bmr phb
bmr sfcs
eibach's on stock shocks
pacesetters
duals
too much other crap to want to think about...

blue printed, balanced and forged bottom end
cam (no specs for joo)
mac mid length headers, ls6 intake, slp loudmouth, pro 5.0 shifter, spec stage 3 clutch, under drive pulley kit, stock rear end, stock heads
made close to 550whp on 150 shot of n2o with the original motor, new built motor has never had nitrous on it in its 10k life

right around 400whp with 400wtq, but i only have dyno sheets for 378whp 392wtq from the stock motor before the build up. still get 16mpg all city miles and 20+ highway. its my daily and i put over 300 miles a week on it

stock heads and 400rwtq?
nice!

A4 with lid, fra, and free mods soon to have pacesetter long tubes and truduals and a 3600-3800 stall

235/240 cam, stock heads, RAM powergrip, kenny brown springs, and i just stuck a bullit mufler on the y pipe. new dyno says 388hp and 370tq, thats with LS1 intake and stock TB.

2ksupersport get a damn LS6 manifold man...you're sitting on 30at the wheels right now. that's a monster cam to only make 388 with a t56

Brandon, there's nothing custom about your cam...it can pretty much be bought off the shelf.

1 3/4 - 1 7/8 Stepped Kooks - ORY. GMMG catback, when it gets fixed. LS6 intake. FIPK. Self-ported TB. Moser 9" w/3.89s full spool. LCAs.

F13 kit waitin to get installed, as well as a March pulley. May have heads in a month or two, we'll see. Depends on how quick the Army pays out.

The 235/240 is a beautiful cam, but I definitely agree with Matt. You need an LS6 intake to let 'er breath. Also, get your tb ported.

yeah, take it to cyphur, he'll hog that bitch out for ya.

All the bolts ons and so forth....417 rwhp.

so forth must be a cam...B, you have a so forth only car....

My, my...aren't you just a quick one.
:eyes:

still have that pussy little cam in that z0h? or did you get 21st to put a "big" cam in there?

Never said it was "big".....TSP Torquer II, yes it is in the car.

i guess i should have put some info on my car....it's an 01 Z28 iron block motor, 6.0L heads (DART heads after they're released), Edelbrock EFI manifold port matched to the heads. heads and intake porting hasn't been done yet. NX gemini plate nitrous kit, th400, 9", wolfe cage, through the floors, swaybar and torque arm. neal chance converter, profab motor plate k-member and lower a-arms, SQR motor plate/mid plate. the car is a LONNNNNGGGGGGG way from completed but that's the plan and it'll be done in due time. parts highlighted in red havn't been bought yet.

Dart coming out with ls1 style heads liftin'em on nitto?