|
Dyno numbers from Conley's...... First pull was untuned and it made 360hp then an hour later, 427hp 382 torque, cam only. This is on a mustang dyno at Conley's. Very happy with the results. Thanks Conley's, Jeff and Eric. Im going to try to make it to the Grand Opening, hopefully I'll see you guys there. |
That is ALOT for a cam only car, esp on a mustang dyno. Not to mention you gained nearly 70HP with tuning, badass! |
good to hear eric...wanna race now? |
damn.... so whats the specs on that cam :secret2: :) |
damn, that is a wicked cam! |
that cam is fucking huge, sounded disgusting!!! I love it :headbang: |
Speed den. Gotta love speed density with a cam that big. I think its like a 248/252 duration Jeff would know more on it. Get a set of heads Erik and lets go back to the dyno. :devil: |
is this on stock ls1 heads? |
Yeah dude those heads are stock.. |
Nice numbers man...hope you make it out to conleys for the dyno day. |
Is that SAE? |
Who did the install? :jest: JK. Nice numbers, i wish my car was down here so we could run. You need to take that bitch to the track, 6,500-6,800 should be a good setting for the 2step. :) |
numbers no need to correct those numbers there is a weather station on the dyno and the mustang dyno is as close as it gets to being completely loaded on the street
Originally Posted by _Zac Is that SAE? |
Originally Posted by 1badV6 Who did the install? :jest: JK. Nice numbers, i wish my car was down here so we could run. You need to take that bitch to the track, 6,500-6,800 should be a good setting for the 2step. :) Well go get that thing, and lets see the battle of the "red cam only" F-bodies...lol, It would be a treat to see those two nasty cars both popping off the 2-step at 6500 :devil: |
you r wellcome eric. |
Originally Posted by fasstls1 Well go get that thing, and lets see the battle of the "red cam only" F-bodies...lol, It would be a treat to see those two nasty cars both popping off the 2-step at 6500 :devil: |
Oh yeah, Thanks 1badV6, and 02WSSICK for the install. I did help put the valve covers and the spark plugs back on. Im hoping to be at the track on Sunday with the good old slicks. I do have stock heads. Heads will come later. |
Sounds like a sweet power house! |
Originally Posted by erodrig2 Oh yeah, Thanks 1badV6, and 02WSSICK for the install. I did help put the valve covers and the spark plugs back on. Im hoping to be at the track on Sunday with the good old slicks. I do have stock heads. Heads will come later. |
Originally Posted by ESR no need to correct those numbers there is a weather station on the dyno and the mustang dyno is as close as it gets to being completely loaded on the street The simple answer could have just been "no it wasn't corrected". |
| All times are GMT -5. The time now is 10:45 PM. |
© 2026 MH Sub I, LLC dba Internet Brands