01FbTaWs6

iTrader: (12)

I know there was someone on here making flycutting tools out of standard valves. Very reasonably priced also. Were pretty much just a valve with 4 pieces of tool steel or carbide welded to it. If anyone has or knows the guy, please post up! Lindy tools and whatnot are out of the question as far as purchase. too much for a one time use deal.

SMOKNSS

iTrader: (3)

https://ls1tech.com/forums/generatio...ee-almost.html

^^^This is the method is usually take...

ElecTech

ISKY also makes a cutter that looks like a valve that can be used to enlarge the eyebrows.

Burning Rubber

iTrader: (1)

My dad made one with sand paper. He JB welded a piece od sand paper to the bottom of the valve. It worked well, but it took a lil while.

Intercooler2

iTrader: (24)

I'm renting mine.

Daryn

iTrader: (19)

you can use an old valve with a piece of properly sharpened carbide, silver sauder it to the edge of the valve and there ya go!

Louis at GSS

iTrader: (1)

I have a few that I rent out, one is on its way back now the others are out in the field.

Its a 350$ deposit, I return 225$ when I get the head back.

PM or call for details