LS cad files available free. Hi all. Thought I'd help out a bit with a few drawings for LS related bits. I'd usually prefer to buy parts but here in New Zealand things are either hard to find and EXPENSIVE or you have to import and pay freight plus tax etc. I found a few of the available files on the net were less than ideal or just plain wrong So I have drawn up and had made a few bits.. Please PM me and I can send you the drawing to then use for laser/waterjet cutting or manual fabrication. So far I have the LS valley lifting plate (drawn for that guy in other thread), LS water outlet plates (pic below) for either spacing out the stock pump or fitting an electric remotely mounted pump, LS engine mount plates and oil pickup mount girdle. I'll include my PayPal details in the email so if you like what Iv done and want to make a donation then you can- but this is purely up to you and I don't actually expect anyone to do this. http://i69.photobucket.com/albums/i5...626_152155.jpg |
Thats a hell of a nice offer. Thanks! |
My pleasure! I certainly believe in the DIY cause |
That's damn decent of ya! |
What else could I draw up? I have a few other bits required for my project that I will get done but could be a while away |
Iv had some good interest from this so need you guys to help. I have requests for (and need) drawings and have no parts to measure so if anyone could help with dimensioned photographs it'd be much appreciated. I hope to produce with your help: ls2 valley cover plate Ls2 into early block chain tensioner adaptor bracket Holley hi rise intake plenum flange (big top flange) 4 bolt throttle body flange |
flyingbrick88, you have some great files. thanks for hooking me up. I appreciate everything. |
I have oil pan flange in dxf for a oil pan flange/shim, also have header flange in dxf (2in primary) but can easily be changed. I really need a HVAC Delete panel in dxf or really any file type. If no one has one ill try to get one drawn up tomorrow along with a 4 bolt TB flange as well since I need one also, would also like a 4500 intake flange too. |
id love a file on those water flanges too! |
Sorry mate, just replied to your pm. Flick me an email and I'll send those files off. Address is in pm |
flyingbrick88 , what cad software do you use? |
Do you happen to have a LS oil pan flange or bolt pattern? |
Originally Posted by onesicss
(Post 18441665)
I have oil pan flange in dxf for a oil pan flange/shim, also have header flange in dxf (2in primary) but can easily be changed. I really need a HVAC Delete panel in dxf or really any file type. If no one has one ill try to get one drawn up tomorrow along with a 4 bolt TB flange as well since I need one also, would also like a 4500 intake flange too. |
Hi guys. Im back after a long while pretty absent- work and life has been getting in the way. Unfortunately i lost a large number of files when a PC went down and it seems i haven't backed up as many of the drawings as i thought i had- If anyone here that received files could flick them back to me PLEASE send a PM. Also, I'd love a copy of that oil pan and header flanges. I'll chuck them into my files folder and will be sure to include your details when i pass them on to people. To all those that i might not have replied to during the past year- Sorry! if you are still interested let me know and i'll sort you out the instant i have things available. PS. Today i have drawn up a rear backing flange for the aero hood latches that are available (i think password makes these plates and possibly some of the new latches come with these plates as standard) |
Originally Posted by mrich0908
(Post 18597350)
flyingbrick88 , what cad software do you use? |
Originally Posted by flyingbrick88 Hi guys. Im back after a long while pretty absent- work and life has been getting in the way. Unfortunately i lost a large number of files when a PC went down and it seems i haven't backed up as many of the drawings as i thought i had- If anyone here that received files could flick them back to me PLEASE send a PM. Also, I'd love a copy of that oil pan and header flanges. I'll chuck them into my files folder and will be sure to include your details when i pass them on to people. To all those that i might not have replied to during the past year- Sorry! if you are still interested let me know and i'll sort you out the instant i have things available. PS. Today i have drawn up a rear backing flange for the aero hood latches that are available (i think password makes these plates and possibly some of the new latches come with these plates as standard) |
I would also be grateful to get a copy of the oil pan and exhaust flange files. Thanks Jason |
Any chance someone has a copy of the ls engine mount plates???? id love a copy if possible. Thanks from down under |
1 Attachment(s)
Originally Posted by damo702002 Any chance someone has a copy of the ls engine mount plates???? id love a copy if possible. Thanks from down under |
I can send ya mine too if ya pm me ya email Addy |
have sent you a pm flyingbrick......thanks mate |
Originally Posted by damo702002
(Post 19216674)
have sent you a pm flyingbrick......thanks mate Please note that I do not have sump flanges (until someone Sends Ms the files) |
1 Attachment(s) I have a torque plate drawing my cousin made for me. Not sure if you can use it. My buddy is going to make it either on a mill or water jet. The thickness should be 1.75", I changed it to show 1.5 for my application. Hope this helps |
Originally Posted by ROCNDAV
(Post 19247454)
I have a torque plate drawing my cousin made for me. Not sure if you can use it. My buddy is going to make it either on a mill or water jet. The thickness should be 1.75", I changed it to show 1.5 for my application. Hope this helps Still trying to find LS sump flange. I personally can't be bothered trying to get that one right, have no use for it myself. |
flyingbrick88 I sent you a PM about the LS valley lifting plate. Thanks, Karl |
M
Originally Posted by onesicss
(Post 18441665)
I have oil pan flange in dxf for a oil pan flange/shim, also have header flange in dxf (2in primary) but can easily be changed. I really need a HVAC Delete panel in dxf or really any file type. If no one has one ill try to get one drawn up tomorrow along with a 4 bolt TB flange as well since I need one also, would also like a 4500 intake flange too. |
SEMA = GM File Sharing (Members Only) Hi from the states, I have great respect for engineers that will share "simple" data, "hats off". GM allows SEMA members to have the LS-Engine CAD file, believe me that was a large file ! I too make a cast LSx oil pan, drawn in SW I too "cut" that part and created a OP "flange file". I will provide that AND other "simple" files to LS-1 Tech members. The art of a SW file , .part "files", is Year Dated. I ask for a file format ? I LIKE ".xt " files. I could just provide you with the needed Flange ? Lance, BTW say hello to Richard Green from me. |
Originally Posted by flyingbrick88
(Post 19210058)
Hi guys. Im back after a long while pretty absent- work and life has been getting in the way. Unfortunately i lost a large number of files when a PC went down and it seems i haven't backed up as many of the drawings as i thought i had- If anyone here that received files could flick them back to me PLEASE send a PM. Also, I'd love a copy of that oil pan and header flanges. I'll chuck them into my files folder and will be sure to include your details when i pass them on to people. To all those that i might not have replied to during the past year- Sorry! if you are still interested let me know and i'll sort you out the instant i have things available. PS. Today i have drawn up a rear backing flange for the aero hood latches that are available (i think password makes these plates and possibly some of the new latches come with these plates as standard) Hey man do you have that Oil Pan flange that is so talked in this tread? |
OP Flange Yes, send me your E-Mail, I will send the .XXX (?) file. . Lance |
Originally Posted by Pantera EFI Yes, send me your E-Mail, I will send the .XXX (?) file. . Lance Krisfrombelloauto@gmail.com |
Cad files ? OK SURE, the Computer Aided Design file formats are MANY. What I NEED to know is the required FILE FORMAT ? Example : ".iges" ".xt" ".part (year), ".dxf" ".stl" ? I use SW AND that APP allows most common formats. Lance |
Originally Posted by Pantera EFI OK SURE, the Computer Aided Design file formats are MANY. What I NEED to know is the required FILE FORMAT ? Example : ".iges" ".xt" ".part (year), ".dxf" ".stl" ? I use SW AND that APP allows most common formats. Lance |
Originally Posted by Pantera EFI
(Post 19509145)
OK SURE, the Computer Aided Design file formats are MANY. What I NEED to know is the required FILE FORMAT ? Example : ".iges" ".xt" ".part (year), ".dxf" ".stl" ? I use SW AND that APP allows most common formats. Lance |
LS-Truck Engine = OK Hi Guys, today I found my LS-7 Flange File. (Truck Engine) I will find my LS-x file Saturday, then send. Sorry for the delay, I have 500Gb of files, ( LS-files) some made 20 years ago. This I can send now ! Lance |
I want that file!! email or pm me! |
Originally Posted by Pantera EFI Hi Guys, today I found my LS-7 Flange File. (Truck Engine) I will find my LS-x file Saturday, then send. Sorry for the delay, I have 500Gb of files, ( LS-files) some made 20 years ago. This I can send now ! Lance Krisfrombelloauto@gmail.com |
Exhaust Flange Sure, I need more information for your EX request. I would like to know the port shape ? I would like to know the port size ? I have more that one EX Flange Part. Lance |
Originally Posted by Pantera EFI Sure, I need more information for your EX request. I would like to know the port shape ? I would like to know the port size ? I have more that one EX Flange Part. Lance Thanks again Lance and dxf is fine as well. |
Originally Posted by Pantera EFI
(Post 19512046)
Sure, I need more information for your EX request. I would like to know the port shape ? I would like to know the port size ? I have more that one EX Flange Part. Lance |
Does anyone have a cad file for the ls bell housing bolt pattern? Thanks. |
Originally Posted by Stampede4ever
(Post 19526858)
Does anyone have a cad file for the ls bell housing bolt pattern? Thanks. I would like this too. |
i have a simple battery box/tray i used in my 99 SS for a sparetire area relocation i built in SW thats in a DXF. If anyone would like it Send me a PM |
Originally Posted by Stampede4ever
(Post 19526858)
Does anyone have a cad file for the ls bell housing bolt pattern? Thanks.
Originally Posted by ROCNDAV
(Post 19527095)
I would like this too. |
Mind if I revive the post? I'd really love the valley cover files |
Im looking for the rear suspension brackets |
Hi guys. Apologies for being so quiet in here! there are definately some great people in this forum !! If anyone has any additional files (oil pan etc etc) please send them to me at nathans.e.mail at gmail.com If anyone would like the files i have (I lost a couple unfortunately) please send an e-mail to that same address. |
Pantera could you send me that oilpan file, pleaaaaaase :-D |
CAD File Format HI All, a "file" request could be more specific ? I could try to "post" by CHANGING the file extension NAME to a Drop Box Location? To KNOW the type of file asked for would be a GREAT help in a request ? Lance |
Sorry mate. I can work with any file type. Dxf would be ideal though. Email to nathans.e.mail@gmail.com :-D and interested in any of your ls drawings |
CAD Files Hi Nathan, sure though the .DFX IS the worst file type with little Data. Can you work with .XT/.Iges/.step ? What files ? PLEASE SEND the request to my direct E-mail. Do you know Richard Moss in NZ ? I just sent him 144 IGN-1A coils, these work well on LS engines. Lance |
Hi. Step is good too. what is your email address? I do not know richard. Thanks! |
Oil pan dxf do you still have the dxf for the oil pan flange?
Originally Posted by onesicss
(Post 18441665)
I have oil pan flange in dxf for a oil pan flange/shim, also have header flange in dxf (2in primary) but can easily be changed. I really need a HVAC Delete panel in dxf or really any file type. If no one has one ill try to get one drawn up tomorrow along with a 4 bolt TB flange as well since I need one also, would also like a 4500 intake flange too. |
Does any one have a cad file for a LS1 T56 bellhousing to transmission bolt pattern? Thanks. |
Hy, do you have a dxf of a front plate? |
Accessory brackets do you have a file for relocating the alternator? Or any other accessories? Thanks in advance |
Originally Posted by Jthompson96
(Post 20062128)
do you have a file for relocating the alternator? Or any other accessories? Thanks in advance |
Ls CAD files
Originally Posted by pantera_efi
(Post 19507374)
Hi from the states, I have great respect for engineers that will share "simple" data, "hats off". GM allows SEMA members to have the LS-Engine CAD file, believe me that was a large file ! I too make a cast LSx oil pan, drawn in SW I too "cut" that part and created a OP "flange file". I will provide that AND other "simple" files to LS-1 Tech members. The art of a SW file , .part "files", is Year Dated. I ask for a file format ? I LIKE ".xt " files. I could just provide you with the needed Flange ? Lance, BTW say hello to Richard Green from me. I would greatly appreciate it. I literally need everything Building a 1931 buick sedan ratrod, and want to build all my own parts The format I use is .dxf kennybaker@live.com |
Is this still a thing? Could I get intake flanges please kevinheraiz@hotmail.com |
Originally Posted by Thetacotown
(Post 20241933)
Is this still a thing? Could I get intake flanges please kevinheraiz@hotmail.com |
New to the LS stuff but I am a machinist and have access to a cnc plasma. Can you send me a .dxf file of the engine lift plate? Tippsy20@hotmail.com Thank You |
|
did you get lift plate file? ive been trying to find one also |
Originally Posted by pantera_efi
(Post 19509145)
OK SURE, the Computer Aided Design file formats are MANY. What I NEED to know is the required FILE FORMAT ? Example : ".iges" ".xt" ".part (year), ".dxf" ".stl" ? I use SW AND that APP allows most common formats. Lance |
Originally Posted by Vic Webster
(Post 20342199)
I know this is an old post but do you have a DXF file for a front motor plate? |
Originally Posted by MMETALWORKS
(Post 20327927)
did you get lift plate file? ive been trying to find one also
Originally Posted by Vic Webster
(Post 20342199)
I know this is an old post but do you have a DXF file for a front motor plate? |
Originally Posted by Teddy-2000RS
(Post 20372210)
I have LS3 CAD files if you are still looking for a model of either shoot me a PM and we can probably work something out. |
You need a certain number of posts before you can PM. I forget how many |
Hey y'all, sorry for bringing this back from the dead. But does anyone have files available to share? My brother just picked up his first fbody and I think it would be really awesome to make some stuff ourselves. |
Hey I was wondering if you could get me a copy of the pan flange dxf? |
Originally Posted by Ryan_LSE30
(Post 20472970)
Hey I was wondering if you could get me a copy of the pan flange dxf? Andrew |
All times are GMT -5. The time now is 05:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands