Tim's Valve Spring Tool Now Available
#42
Launching!
iTrader: (66)
Join Date: Nov 2004
Location: Livonia, MI
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
LT99LS1,
I sent a email to you. Yes I received payment and will mail your package to you on Saturday. Thanks for your purchase and everyone else as well who has ordered our tool so far.
Tim
I sent a email to you. Yes I received payment and will mail your package to you on Saturday. Thanks for your purchase and everyone else as well who has ordered our tool so far.
Tim
#43
TECH Apprentice
iTrader: (3)
Thank you. I have a car to work on next weekend.
Originally Posted by 2001 SOM WS6 69 GTO
LT99LS1,
I sent a email to you. Yes I received payment and will mail your package to you on Saturday. Thanks for your purchase and everyone else as well who has ordered our tool so far.
Tim
I sent a email to you. Yes I received payment and will mail your package to you on Saturday. Thanks for your purchase and everyone else as well who has ordered our tool so far.
Tim
#44
Just finished a spring swap on my car using this tool. Worked perfectly, even on a 98 car with perimeter valve cover bolts.
Tim was very helpful with shipping as well. Stand-up guy with a great tool!
Luke
Tim was very helpful with shipping as well. Stand-up guy with a great tool!
Luke
#45
Teching In
Join Date: Dec 2004
Location: BROWNSTOWN, MI
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Tim's dad where are you located I would like to pick up one of these tools today. I'm off work today and planned on completing my car and my valve spring tool is junk.
Dan
Dan
#47
Launching!
Thread Starter
iTrader: (32)
Join Date: Feb 2002
Location: Detroit area
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 98C5TT
Tim's dad where are you located I would like to pick up one of these tools today. I'm off work today and planned on completing my car and my valve spring tool is junk.
Dan
Dan
Thanks, John
#50
Launching!
iTrader: (66)
Join Date: Nov 2004
Location: Livonia, MI
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
NOSJohn - I sent you a PM with my shipping address.
Formulated - If you don't find one I can overnight one to you, but you will have to add $ 15.00 extra to the $ 30.00 and payment will have to be via PayPal. Just let me know as I usually ship our tools USPS priorty mail which takes 2-3 days
Formulated - If you don't find one I can overnight one to you, but you will have to add $ 15.00 extra to the $ 30.00 and payment will have to be via PayPal. Just let me know as I usually ship our tools USPS priorty mail which takes 2-3 days
#52
TECH Veteran
Join Date: Aug 2002
Location: Hartsdale, NY
Posts: 4,055
Likes: 0
Received 0 Likes
on
0 Posts
When changing valve springs, what is the easiest way to determine if the piston is at the top?
I've sean the:
1. close line rope in the cylinder trick and
2. the compressed air in the spark plug hole trick too.
I assume it is easiest to change springs when you know the piston is at the top and tht it will prevent the valves from dropping down into the holes when you remove the spring keepers.
On the older Gen 2 small blocks and earlier you could tell by looking at the crankshaft pulley but since reluctors and PCMs have been adeveloped crankshaft pulleys are now pressed on and do not have degree markings...
I've sean the:
1. close line rope in the cylinder trick and
2. the compressed air in the spark plug hole trick too.
I assume it is easiest to change springs when you know the piston is at the top and tht it will prevent the valves from dropping down into the holes when you remove the spring keepers.
On the older Gen 2 small blocks and earlier you could tell by looking at the crankshaft pulley but since reluctors and PCMs have been adeveloped crankshaft pulleys are now pressed on and do not have degree markings...
#58
Launching!
iTrader: (66)
Join Date: Nov 2004
Location: Livonia, MI
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Tims Tool
SLP CARS '98 and MTBDOC,
Shipped out your tools Yesterday.
I am currently making up another batch and will have them ready for shipping tonight.
Thanks for everyone's purchases and all the positive feed back from everyone, I really appreciate it.
Tim
Shipped out your tools Yesterday.
I am currently making up another batch and will have them ready for shipping tonight.
Thanks for everyone's purchases and all the positive feed back from everyone, I really appreciate it.
Tim
#59
Restricted User
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
Tim,
Is there anyway you can charge me and send off say 8 or 10 of the bolts? I cant find anything to replace mine on this island and would like to make my swaps quicker yet maintain my tool of choice. Please let me know. Everything has been sweet through 12 or more spring swaps but I would appreciate being able to just pay for some extra bolts.
Charlie
Is there anyway you can charge me and send off say 8 or 10 of the bolts? I cant find anything to replace mine on this island and would like to make my swaps quicker yet maintain my tool of choice. Please let me know. Everything has been sweet through 12 or more spring swaps but I would appreciate being able to just pay for some extra bolts.
Charlie
#60
Launching!
Thread Starter
iTrader: (32)
Join Date: Feb 2002
Location: Detroit area
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CAT3
Tim,
Is there anyway you can charge me and send off say 8 or 10 of the bolts? I cant find anything to replace mine on this island and would like to make my swaps quicker yet maintain my tool of choice. Please let me know. Everything has been sweet through 12 or more spring swaps but I would appreciate being able to just pay for some extra bolts. Charlie
Is there anyway you can charge me and send off say 8 or 10 of the bolts? I cant find anything to replace mine on this island and would like to make my swaps quicker yet maintain my tool of choice. Please let me know. Everything has been sweet through 12 or more spring swaps but I would appreciate being able to just pay for some extra bolts. Charlie