2005 C6 Z51 427 - Fast and priced to sell!
07-26-2009, 02:19 PM
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2006
Location: Alexandria, VA
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
2005 C6 Z51 427 - Fast and priced to sell! 
http://www.youtube.com/watch?v=ApMnc0mCInU
2005 C6 CORVETTE 427ci 600HP+ FAST CLEAN
PRICE: $26,000 DROPPED NOV7 - $25,000
2005 C6 Corvette
1G1YY22U255111031
Z51 Package (slotted rotors, transmission cooler, thicker sway bars)
Machine Silver Color
6 speed manual transmission
Black C6 Split Spoke Wheels
Firestone Run-flat tires (front have plenty of life left, the rears are nearing their end)
92,000 Miles (all in California - no salt no snow)
MOTOR - The heart of it all:
Forged 427ci motor
LS3 Block (416)
CNC'ed L92 heads, (360cfm intake and 280 cfm exhaust)
Patriot gold duel springs
stainless valves
titanium retainers
Scat 4.100 forged crank
Scat rods
ARP bolts
Diamond forged pistons
ARP head studs
L76 manifold
40lb injectors
Comp lifters
Hardend pushrods
Comp cam 232/234/595/598/112LSA
MSD wires
160 stat
Motor built and speed density tuned by Charlie Williams @RPM Motors
Installed at A&A Corvette
Dyno - 523rwhp/489rwtq
Other modifications:
Kooks headers 1 3/4''
B&B Bullet CAT back exhaust
Accelerator Intake
Elite Engineering oil catch can
Balanced LS7 clutch
Direct fit large capacity radiator
New water pump (installed August 1 at Lindsay Cadillac)
I recently drove this car from Los Angeles, CA to Alexandria, VA - car performed flawlessly and I got on average 28 MPG. The forged motor has 40,000 miles on it and was built by one of the most well known Corvette engine builders in the country (Charlie @ RPM Motorsports CA). The car has never been abused or raced. The car did have a door skin replaced from an accident that occurred in a parking lot (I have a copy of the carfax report).
VA Emissions - car has all the proper components to meet VA emissions and is good for the next year.
The reason for sale:
After purchasing the car I was offered a tremendous employment opportunity. I could keep the car, but it just doesn't make practical sense given my new office location in DC. Sitting in traffic in the city bumper to bumper is no fun and I need something a bit more practical for city driving.
I look forward to answering your questions, regardless of how trivial you may think they are. Any chance to talk cars is warmly welcomed! I have all documented receipts from the previous owner since the car rolled off the assembly line - even down to EVERY single oil change. All was hand documented.
There is one small problem I've yet to work out:
The passenger window, when warm out side, doesn't like to go down unless you tap the inside of the door. It could be the track is ever so slightly off alignment or the switch could have a small short. I doubt this is a significant issue and could be resolved fairly quickly, I just haven't had the time to pull the door apart.
Other than that issue the car is PERFECT!
In the end someone is going to get this car at a great price and with a motor that will last 300,000 miles!
PRICE: $26,000 - DROPPED NOV7 - $25,000 DEC 23 LAST DROP $24,000 W HP TUNER
* I encourage you to shop around for other cars of this year and mileage that are stock. You can not and will not find this much car for this little bit of money ANYWHERE. this is price just a few thousand over TRADE IN value.
Happy Motoring,
Last edited by valdeztke; 12-22-2009 at 07:20 AM.
07-26-2009, 05:07 PM
#4
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2006
Location: Alexandria, VA
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
Not yet. Today its just me here at the house and I don't like trying to film and drive. Seen too many bad things happen when others have tried that.
I hope to have some this evening when the Mrs. gets home.
Yes, the car really MOVES
I hope to have some this evening when the Mrs. gets home.
Yes, the car really MOVES
07-31-2009, 10:38 PM
#6
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2006
Location: Alexandria, VA
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
Just cleaned up the startup air flow idle and dailed in the idle airflow min to keep it from hangin up. 100% difference. Just need to make the smaller minor adjustments to get it PERFECT>
Trending Topics
08-01-2009, 11:50 PM
#10
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2006
Location: Alexandria, VA
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the PM's guys. I knew this wouldn't last long here. Have two people very interested and may drive down to check it out tomorrow.
08-01-2009, 11:54 PM
#11
TECH Resident
iTrader: (23)
Join Date: Oct 2008
Location: Rhode Island
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
man im 20mins away i would love to see this bad boy. lol if i could sell my camaro in time i would pick this up. if you know anyone interested let me know and ill buy yours.
