SS SLP turbo camaro
05-03-2010, 11:06 AM
#1
Registered User
Thread Starter
Join Date: Oct 2008
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
SS SLP turbo camaro Year: 1996
Make: Chevrolet
Model: Camaro
Price: $13500
Mileage: 58000
Private or Dealer Listing: Private Listing
Location (State): KY
Color: Red
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has other engine
This car is a very clean and straight car. There is alot of time and money spent on this car have over $25000 in receipts
Small info on car will give full details to true buyer.
Engine 383 sbc
eagle internals
trick flow heads
Turbo trans
5200 converter with anti ballooning plates.
trans brake
revs manual valve body
76mm turbo
all new piping
9 inch
410 gears
moser axles
locker
4 wheel disc brakes
all suspension has been replace with bmr nothing cheap.
Inside
Black leather
t-tops
All new gauges and tach
Wheels
Bogart r\t
15x10
15x4
New 28x10.5 slicks
morso front runners
Clean and clear title in hand.
location in elixabthtown ky.
pm any questions
thanks
Last edited by black2v; 05-08-2010 at 07:43 AM.
05-11-2010, 07:15 AM
#7
Registered User
Thread Starter
Join Date: Oct 2008
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Heres the rest of the info.
over 40k into this car its completely done up ! 95% complete my wife says I have to get rid of one of the race cars so its gotta go !
Ok , Ill try to list everything ,the car started out bone stock when I bought it ,its a real SLP ss car Torch Red with ebony leather interior all power mint condition ,the car has 58k on it never seen snow a just a few times caught in the rain it is a T-Top car as well ,alright now for the good stuff LOL.. The engine is a 383 CI all forged Eagle rotating assembly ,JE custom dished pistons for boost ,hellfire rings,the block is splayed with billet cap's ,cloyes billet double roller timing chain,Trickflow heads I bought these bare had gave them to highflow heads in alsip Il,. He ported these heads to the max ,installed oversized PSI spring which are the best $600 for the set ,he did a lot of work just to make them fit ,ferra valves the best , all light weight valve train over $3500 in the heads ,the intake was matched to the heads and was epoxied to straighten it very nice job ,custom fabed valve covers ,95 lb fast injectors,fast xfi engine management system,painless wiring thru the car and everything works even the power mirrors,ati balancer,manziere electric water pump ,all braided lines entire car , aeromotive fuel pump the big one its hooked in with the fast system and is controlled thru there ,Custom made gas tank made out of aluminum fits in factory location sumped very nice made by Nasty performance here in Il , JW the Wheel flex plate,Turbo 350 trans built crazy was in my friends car the went 8.'s then i got it and had it freshened up manual reverse valve body with brake,Coan converter 5200 stall ,cromoly drive shaft 1350 u joints, Moser ford 9" rear end has a detroit locker and 410 gears ,Custom made aluminum radiator,dual fans facing the front bumper, big trans cooler with fan, all braided lines for that as well, cheeta shifter,BMR as follows- Kmember,upper and lower adjustable a-arms,torque arm connects to the frame connectors (welded) this is the best one out ,frame connectors,panrod bar,lower control arms,tunnel brace,anti roll bar,basically everything under the car that can be changed is all BMR ,QA1 coil over's front,QA1 adjustable rear shocks,bogart wheels like new 28x15,10.5 M/T slicks like new ,Moroso frontrunners 26" tall,the turbo is 76 mm custom made headers,egt's with gauges,MSD 7al2 box ,msd Crank trigger,msd wirers,accell opti,well I think you get the point its a bad *** car !!!
over 40k into this car its completely done up ! 95% complete my wife says I have to get rid of one of the race cars so its gotta go !
Ok , Ill try to list everything ,the car started out bone stock when I bought it ,its a real SLP ss car Torch Red with ebony leather interior all power mint condition ,the car has 58k on it never seen snow a just a few times caught in the rain it is a T-Top car as well ,alright now for the good stuff LOL.. The engine is a 383 CI all forged Eagle rotating assembly ,JE custom dished pistons for boost ,hellfire rings,the block is splayed with billet cap's ,cloyes billet double roller timing chain,Trickflow heads I bought these bare had gave them to highflow heads in alsip Il,. He ported these heads to the max ,installed oversized PSI spring which are the best $600 for the set ,he did a lot of work just to make them fit ,ferra valves the best , all light weight valve train over $3500 in the heads ,the intake was matched to the heads and was epoxied to straighten it very nice job ,custom fabed valve covers ,95 lb fast injectors,fast xfi engine management system,painless wiring thru the car and everything works even the power mirrors,ati balancer,manziere electric water pump ,all braided lines entire car , aeromotive fuel pump the big one its hooked in with the fast system and is controlled thru there ,Custom made gas tank made out of aluminum fits in factory location sumped very nice made by Nasty performance here in Il , JW the Wheel flex plate,Turbo 350 trans built crazy was in my friends car the went 8.'s then i got it and had it freshened up manual reverse valve body with brake,Coan converter 5200 stall ,cromoly drive shaft 1350 u joints, Moser ford 9" rear end has a detroit locker and 410 gears ,Custom made aluminum radiator,dual fans facing the front bumper, big trans cooler with fan, all braided lines for that as well, cheeta shifter,BMR as follows- Kmember,upper and lower adjustable a-arms,torque arm connects to the frame connectors (welded) this is the best one out ,frame connectors,panrod bar,lower control arms,tunnel brace,anti roll bar,basically everything under the car that can be changed is all BMR ,QA1 coil over's front,QA1 adjustable rear shocks,bogart wheels like new 28x15,10.5 M/T slicks like new ,Moroso frontrunners 26" tall,the turbo is 76 mm custom made headers,egt's with gauges,MSD 7al2 box ,msd Crank trigger,msd wirers,accell opti,well I think you get the point its a bad *** car !!!
Trending Topics
05-11-2010, 09:18 AM
#8
Staging Lane
iTrader: (6)
Join Date: Apr 2005
Location: rochester n.y.
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
ttt sounds nice man....you should put up some really sweet pics.
and what do you mean 95% ???? is it tuned to perfection?and who did the tune?if you feel the tune is perfect,you should put up a phone # who did it.because anyone buying a f/i car knows that all those top line parts mean nothing with out a perfect tune. bump for a sweet sounding car man!!!
and what do you mean 95% ???? is it tuned to perfection?and who did the tune?if you feel the tune is perfect,you should put up a phone # who did it.because anyone buying a f/i car knows that all those top line parts mean nothing with out a perfect tune. bump for a sweet sounding car man!!!
