Heyhoss93

iTrader: (3)

Year: 2002
Make: Chevrolet
Model: Camaro
Price: $12000
Mileage: 80000
Private or Dealer Listing: Private Listing
Location (State): IA
Color: Silver
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine

Selling my 2002 Z-28. Have recently been layed off and the car has to go . Car is in great shape, no major blemishes. Car was purchased in 07 with 72k on the clock. and now has just over 80 on it. Car has been stored inside since purchased, and has never seen rain or snow. It has an OEM SS hood and spoiler, both painted to match. T-top car, which DO NOT leak. Interior is ebony, an in perfect condition, no rips or tears. Car was tuned by Speed Inc. in 08 and made 361RWHP, 362RWT. Motor was rebuilt by American Speed in 09, with items listed below, and has not been redynoed for HP, numbers point to around the 400 range. Car has many aftermarket parts and will make a great street strip car for who ever buys it.
heres a list of all parts
motor
*Wiseco Forged flat top pistons, 3.905 bore -2.2cc valve relief
with Total Seal Advanced Profiling Rings
*Eagle Hbeam connecting rods, 6.125 with ARP 8740 bolts
*Clevite bearings
*GM replacement LS7 lifters
*Texas Spd Torquer V.3 Cam 231/234 .643'/.598" on a 111
seperation.
*Texas Spd 7.40 Pushrods
*Precision Race Components 650 lift double valve springs with
TI retainers
*Meling High preformance oil pump
*LS2 timing chain and cam gear
*ARP balancer bolt
* 42lb Racetronic fuel injectors
* SLP air lid with smooth bellows
* SLP ceramic coated long tube headers
Trans
*Centerforce dual friction clutch
*Tick preformance 2,3,4 gears
*Billet keys and syncro sliding rings
*Hurst short throw shifter with leather wrapped ****
Rearend
* Moser factory replacemant 9in housing
* Moser cast iron nodular third member with aluminum pinion
support
* Moser 35 spline axles
* Strange spool
* Billet 1350 yoke
Suspension
*Comp engineering drag shocks rear
*UMI lower control arms
*Spohn rear sway bar kit with poly end links
*UMI body mounted torque arm with built in DS loop
Wheels
*15x4 front, 15x10 rear prostars with MT ET radials
Misc
*AEM wideband
*Edelbrock progammable nitrous controller
*NX nitrous kit with 300hp shot solenoids
*Stock SLP loudmouth exhaust.
Now the bads. Car will need new front tires soon. There is one small dent on the passenger rear quarter panel. Car is minus the AC and all components there of, and the front sway bar has been removed. I still have all parts to reinstall these items.

Looking for $12,000. car will be sold for less without the nitrous system.
contact Jason at 563-320-3403
or send PM

Heyhoss93

iTrader: (3)

bump! CAR NEEDS TO SELL willing to deal some

djz28

where are you located?