wtt modded 98 camaro for bike
07-02-2011, 04:03 PM
#1
wtt modded 98 camaro for bike Year: 1988
Make: Chevrolet
Model: Camaro
Price: $100
Mileage: 88000
Private or Dealer Listing: Private Listing
Location (State): IN
Color: Red
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
My car is a 98 z28, I bought the car a little over 2 years ago with 33xxx miles, my car currently has 88xxx on it now. The cam swap was done around 58xxx miles. My car runs great, and I have always used royal purple oil in it.
the paint is 9 out of 10. . The passenger side window motor is slow, but thats usual for all fbodies. I also have a little gear whine at around 65mph. My car is in need of a tune, It struggles on idle on cold start ups. If your really interested in the car, I will pay to have it re-tuned. I is on a closed loop tune, so i do not run o2 sensors. I have brand new o2 sensors tha come with the car if you prefer to change the tune.
My car runs strong, I have some extra parts that can come with the car, a 10 bolt with 3.23's, two berger panels one that is red and one that is black with red camaro lettering. Also have the stock 5 spock 16's with decent tires. I have 98 heads and valve covers, stock cam,stock torque converter. .
Motor
ls1 motorsports lid
MSD plug wires
comp 7.4 push rods
leigenfelter oil pump
Ls2 timing chain
comp 224/230 591 lift 114lsa cam
milled 99 heads
patriot dual valvesprings
pacesetter headers and y pipe
ls6 intake manifold painted single stage torch red
Fuel
Racetronix fuel pump with hot wire kit.
#30 svo injectors rebuilt last year(3k miles)
Nitrous (hasnt been put on)
HSW nitrous plate
complete zex nitrous kit
electronic nitrous gauge
Trans
fully Built 4L60E tranny built 2 weeks ago.
4000 yank torquw converter
Tci flexplate
Wheels and susp.
prostars 15x3.5 front and 15x8s with et drags in back
also have stockers
lowered 2 inches front and 1.5 in the back
Sfc unsure on brand
Hotchkis Lower control arms
Gm 373 gears
Slp line lock
I have spent over $10,000 in parts on this car.
Last edited by johnLs1camaro; 07-02-2011 at 04:20 PM.
07-05-2011, 11:48 PM
#7
Teching In
iTrader: (4)
Join Date: Jun 2011
Location: Fairborn, OH
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2003 Yamaha R1, slight rash from a lowside but frame and motor are perfect, runs perfect and looks great. I would be more interested in the motor than the whole car. I have a 1998 Trans AM that spun a crank bearing. I really want to get my car back on the road as soon as possible and would be willing to trade.
Trending Topics
07-09-2011, 02:40 PM
#19
04 hayabusa limited, 1397, ported head, cams. its extended right now but have stock arm and a Macintosh arm under-braced. it has the 6 over catalyst tail but also have stock tail. has nos kit not installed, new air shifter and two step not installed.
