2001 Z/28 Camaro I am selling a 2001 Chevrolet Camaro Z28. The car was wrecked at 42,xxx miles and now has a salvage title. It had light front end damage. The frame is not bent. The damage has been repaired and has brand new fenders and bumper cover. The previous owner bought the car and started stripping it to build a drag car. It has a 10 bolt rear-end with 4.88 gears. Has koni shocks all the way around with QA1 springs on the front. It has a UMI tunnel Brace Mounted Torque Arm with drive shaft loop. Has a PA Racing tubular K-member, and tubular transmission crossmember. It has a very nice set of Bogart D10 wheels that are f-body specific with brand new front runners, and the rear slicks are hoosiers that have seen better days. It has a VFN Sunoco cowl hood. I recently put brand new rotors and pads all the way around. As far as interior it has a racing bucket seat, and a hurst shifter. I have rounded up most of the interior plastic pieces other than a dash to put back in it. There is no wiring in the car. It has been stripped and gutted for a drag car. The car was setup with a 408 Small Block chevy and a turbo 350 transmission. If you have any questions, or would like to see some more specific pictures please feel free to ask. Car is located in Amarillo Texas. Thanks, Sheldon Thomas 806-382-2985 http://i760.photobucket.com/albums/x...maro/001-1.jpg http://i760.photobucket.com/albums/x...maro/002-1.jpg http://i760.photobucket.com/albums/x...maro/003-1.jpg http://i760.photobucket.com/albums/x...maro/004-1.jpg |
To the top! I am negotiable on price and open to all trade offers! :cheers: |
Sell the wheels?? |
I would have no way of shipping them. What do you offer? |
They're 15's? What're they worth to ya |
Yes they are 15's. Ive been offered 800 plus their stock wheels to put back on it. Sounded quite low to me compared to the price these are new. And these are near new! not a single flaw in them. |
To the top! Somebody needs a good roller! Also some engine pieces can be made available. I have a Lunati pro mod crank for ls. its a 4.125 stroke. I have a set of lunati pro mod I beam rods, and 6 good used diamond pistons that are 5 over. This stuff was in a 346 ls1, making it a 396 I believe. 2 pistons were trashed as well as block. I can sell this stuff however you like it. I was going to build an aluminum 6.0 block and build like a 415. Whatever route you wanted to go with, I can get a block. You'd just have to buy pistons! |
Bump! |
to the top:burn: |
Bump it up! |
New price! Got in a bind need some cash. 1500 less wheels and tires. Will not take a single penny less than that. Thanks, Sheldon |
Can it be put back on the street? Or is all the writing gutted? |
*wiring.. Damn auto correct |
Originally Posted by 21rev_z28
(Post 15957612)
Can it be put back on the street? Or is all the writing gutted? |
Correct, all the wiring is out of the car. I guess if you had another one that you could swap all the wiring to this car then sure. But it is currently stripped and gutted. This would make someone a great car to go race for cheap! The guy I got it from said he had been 6.50's in the 1/8th with the small block and a 150 shot in witchita falls |
To the top! Great car to get into racing :thumb: |
Believe I have it traded off :chug: |
Still for sale! Have'nt heard anything! |
Roller What's the least you'll take since you still have it |
Still for sale... |
All times are GMT -5. The time now is 07:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands