1993 Mazda R1 2010 camaro LS3 21kupdated pics
05-30-2012, 09:56 PM
#1
Teching In
Thread Starter
Join Date: Nov 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
1993 Mazda R1 2010 camaro LS3 21kupdated pics Year: 1993
Make: Mazda
Model: RX-7
Price: $21000
Mileage: 93000
Private or Dealer Listing: Private Listing
Location (State): MD
Color: Black
Parts:
Body:
Shineauto Burnout rear fenders
Shineauto Burnout front fenders
Cwest front bumper
99spec Turn signals
Shineauto Feed carbon fiber sideskirts
Feed replica carbon rear wing
Wheels: Sport max 9.5x18 front wrapped in Bfgoodrich geforce TA 235/40/18(NEW
Sport Max 11x18 rear wrapped in BFgoodrich Geforce TA 275/35/18(new)
Brakes/suspension:
H/R Lowering Springs(should be replaced)
Brembo Front Rotors
OEM rear rotors
Hawk Pads all around
Improved racing to links/trailing arms
Interior:
Hinson offset shift arm
Pro 5.0 shifter
Norotors shifter hole cover
Aeroforce interceptor gaugesx2
Pioneer Headunit
Pioneer speakers(fronts and rear
Redline goods ebrake/shifter boot/ebrak handle cover and center console cover
Floormats stitched with "LS3 Rx7" black with grey stitching
Engine:
2010 Camaro 6.2 liter v8 with less than 16 miles(new)
2002 Firebird t56 with 4k miles
JTR 1 7/8 ceramic coated headers
Dual 3inch Stainless steel exhaust with X-Pipe going to single magnaflow dual tip muffler(straight pipes)
GMPP Ls3 engine controller kit
GMPP cadillac ctsv front drive accessories with a/c mounted but not installed
New master cyllinder/slave cyllinder(I forget brand, but its the one we all use)
2010 z06 clutch/flywheel/pressure plate
z06 fuel system
Aeromotive FPR
Supra fuel pump
Hinson radiator kit
Tick remote bleeder
(I'm sure I'm missing a couple things)(Just about everything mechanical on this car was bought brand new).
I'm sure I'm missing something, but the car needs just a little bit more work to be put into it so it is 100percent. The interior is honestly about a 6 or 7 10. Asking 19k. Please CALL me at 301-518-2362 if interested. I'm bad at text messages and e-mails.
Things that need to be done to the car after a long lookover:
New diff bushing
Harness under driver side fender well tucked
AC system installed(condenser mounted/compressor mounted)
Gauge/AC cluster lights(I probably just didnt connect a harness, I don't know)
New Blower motor(a/c/heat)
Interior needs some TLC, but the engine has 16 miles on it, trans is 4kish.
Call AT 301-518-2362 NAME IS DOUG
Last edited by Tenacious; 06-21-2012 at 04:11 PM.
05-31-2012, 10:19 PM
#6
Teching In
Thread Starter
Join Date: Nov 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for the compliments! She's definitely a beauty, and a lot of hard work put into her. I just feel its time to pass the torch!
The gmpp LS3 controller kit is basically a crate engine setup, I believe the ecu is the same in the 2010 base vette. Also tuned to that of a base model vette. The engine is completely stock, except for the fuel system.
I apologize, I'm not familiar with HPtuners.
Either way this vehicle is a steal at 19k. Feel free to call for any additional questions, I'm available anytime. 301-518-2362 @Doug
I apologize, I'm not familiar with HPtuners.
Either way this vehicle is a steal at 19k. Feel free to call for any additional questions, I'm available anytime. 301-518-2362 @Doug
Last edited by Tenacious; 05-31-2012 at 10:41 PM.
