98 Z28 408 Stroker
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: WV
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Year: 1998
Make: Chevrolet
Model: Camaro
Price: $9000
Mileage: 100
Private or Dealer Listing: Private Listing
Location (State): WV
Color: Black
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
This car is built sounds amazing and run very very strong. Motor has less than 100 miles. I have been building this car for two years and and found a piece of property I am interested in so the car must go. I have receipts for all engine parts that total over 8,000. I have idle clips and pics I can send from my phone. No trades. Figure i would cut the BS and give my bottom dollar 9,000 FIRM My loss is your gain.
Call or text (304) 437- four four four nine Cody. Car is located in elkview, wv
Motor specs:
408 cubic inch
6.0 LQ4 block .030 over
Callies Compstar 4" forged crank
Callies h beams forged
Wiseco -3cc pistons 2618 forged
Balanced bottoms end
Clevite 77 bearings
arp rod bolts
Arp main and head studs
Melling hp oil pump
Ls3 head gaskets
Ls3 821 heads 2.16 intake valve
PAC 1518 valve springs
Texas speed 7.425 chromo pushrods
Ls7 lifters
Comp custom grind cam speced by Pat G 239/247 .624/.624 113 LSA+2
Ls3 intake and fuel rail
42lb injectors
90mm Nick Williams Throttle Body
Texas Speed 1 7/8 headers
Texas Speed 3" off road y pipe
Slp loudmouth exhaust
Truck 85mm mass air flow
Slp throttle cable bracket
New flex plate and harmonic balancer
Trans:
4l60e
3500 stall
B&m stage 2 shift kit
Alto eagle clutches
Rear:
3.73 gears
Auburn locker
Other:
Prothane Poly Motor Mounts
Walboro 255
#7
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: WV
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
never been on the dyno. I have some e-mails that Pat G sent me from when i speced the cam and he said im in the 525-550 range. There isn't a dyno in WV and its hard to find the time to take it out of state for a dyno pull. I know bluecat is fairly close to me in kentucky but he is always busy
Last edited by onebaddmax; 06-15-2012 at 12:14 PM.