1986 c10 ls swap!
06-13-2012, 03:31 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
1986 c10 ls swap! Year: 1986
Make: Chevrolet
Model: C/K 10
Price: $5000
Mileage: 0
Private or Dealer Listing: Private Listing
Location (State): LA
Color: Red
Transmission: Automatic
Drivetrain: Rear Wheel Drive
Truck is an 86 c10 that I have been working on for a while but no longer have the funds to finish it like I want or a shop to store it in. Don't really know what a truck like this would be worth so this is really just a feeler to see what kind of offers I could get. If they are good enough then the highest offer takes it. The truck isn't completely finished but does run and drive fine the way it is.Truck has a 5.3 engine swapped in with a ls6 intake manifold, car oil pan and pick up, long tube headers with 2.5" duel exhaust with x pipe and magnaflows. Has a 4l60e transmission that I just payed over $2500 to have a performance build with a 2800 stall about 3 months ago. Has all brand new autometer gauges, brand new nitto nt850 255/45r20 tires all the way around. Flip kit on the rear and 2.5" drop spindles and 2" drop springs on the front with beltech nitro drop 2 shocks all the way around. All new brake components front and rear, calipers, pads, hoses and so on, Everything from the engine to trans to gauges to suspensionand tires and brakes that I have listed was done at the same time and only has about 1000 miles on it. AC worked great before I pulled the stock 305 out of the truck so with just a compressor installed you should be chilling again. Truck didn't have that many miles on it and I think it still has all the original ball joints and bushings and probably could use replacing if nothing more than because of the age. The body is not rusted up and is very strait for the most part and as far as I know it is the original paint and while it looks good for its age could deff use a new paint job. Other than all new autometer gauges the interior is just as old as the paint and could deff be freshened up with new carpet, seat recovered and dash pad isn't terrible but has a few small cracks from age. With a lil more work this could be a great old truck and im sure someone could enjoy it! My location is Monroe La. I am having trouble to get most of my pictures to load so for any questions or more pics pm me your email and I will get some to you asap. Thanks!
Here is a quick walk around vid:
Last edited by superchomper2003; 06-14-2012 at 12:30 PM.
06-25-2012, 10:44 PM
#7
On The Tree
iTrader: (-2)
Join Date: Oct 2004
Location: amarillo,tx
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
I would like to get some more pics of the truck.
How many miles were on the 5.3?
Is it just a factory short block?
Cam? Heads? Other than paint and interior, what else will this truck need to be complete? Balanced driveshaft? Anything you could tell me would help. I would like some pics of the interior and gauges. Thanks
How many miles were on the 5.3?
Is it just a factory short block?
Cam? Heads? Other than paint and interior, what else will this truck need to be complete? Balanced driveshaft? Anything you could tell me would help. I would like some pics of the interior and gauges. Thanks
