1984 Mazda RX-7 drag car roller - valid nhra cert
01-29-2013, 07:37 PM
#1
8 Second Club
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
1984 Mazda RX-7 drag car roller - valid nhra cert Year: 1984
Make: Mazda
Model: RX-7
Price: $10000
Mileage: 0
Private or Dealer Listing: Private Listing
Location (State): Can-ON
Color: Blue
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Car located near Detroit Michigan, but across the river in Canada.
so heres the details
1984 RX-7
painted 2004 STi world rally blue, flat black hood.
8 point cage with swing outs NHRA certified, 2 seasons left on cert
Mini tubbed to fit a 28x10.5W Mickey Thompson slick
Rear suspension etc. --- ford 8.8 narrowed by DTS (Detroit, Mi), Moser 35 spline axles with Moser spool, 3.73 FMS gears, 5/8 wheel studs, QA1 dual adjustable shocks, Comp eng. ladder bars,Comp eng. anti-roll bar, Comp eng. wheelie bars, Willwood 2 piston callipers with 2 piece rotors.
Front suspension etc --- coil overs with very soft springs, 5 lug swap, T2 aluminum callipers, adjustable limiter chains.
Wheels - Weld Prostars 15x10 in the rear with a 28x10.5w, front are 15x4 prostars with a 24" MT skinny
All windows and windshield replaced with lexan, light weight bumper supports, floor pan replaced with aluminum, rear hatch floor is steel for the 10gal fuel cell to mount on.
Jaz racing bucket on custom seat mount, RJS harness is present but will be expired by spring.
Car has run a best ET of 8.99 and a best 60 foot of 1.27, power was my limiting factor in bettering those times. The chassis still has more in it with more power.
I'm sure I'm forgetting something so ask away.
Stock LS2 short block in the 8's - '84 RX-7 heads cam nitrous
first 1.290 60 foot - 84 ls2 rx-7
Car currently set up with an LS2 on spray which could be negotiated separately, only looking to sell roller at this point.
Asking 10,000 US or Canadian dollars.
Last edited by mactizen; 01-29-2013 at 08:25 PM.
