WTT 1995 Z28 408 LT1 6speed Houston TX Area
 

Recently built 396 Stroker bored .060 to a 408. This engine has 500 miles on it. All break in. Beast is the only work I can describe it.
So here is what i have.
Big Mouth Mono blade Arizona Speed and Marine throttle body.
Lloyd Elliot Stage 4 Heads, Intake and cam package. Fully ported factory heads. 2.06 Intake Stainless Valves,1.62 Exhaust. 1.6 Roller Rockers, and .700" Springs, Comp Hardend pushrods.
Built T-56, with stage 5 Full Ceramic Clutch. It will hold 800+ Hp at the wheels.
Built 408 Fully forged eagle rotating assembly from USA Racing Engines in Houston.
Electric waterpump-Mezier
Aftermarket Harmonic Damperdum
Stainless Long tube headers with X-pipe and bullet mufflers and dumps.dum
Body is straight with no accidents, runs great. No a/c, no heater. Worked when I pulled the motor, just never reinstalled it. Never had intentions of using it again.dum
Aftermarket rims and tires, Dished 18x11 rear and 17x9 up front. With 335-35-18 Dodge viper tires on back. The car has end gears and a sound system with no leaking ttops.dum
Tuned by PCMFORLESS.dumThis is just a preloaded tune and will need a dyno session and a fine tune.
The car is violent for an LT1, and not for beginners. Will make your friendly neighborhood LS1 it's next victim.dum
$10,000- Price is Firm. Will not take any less....no low ballers. Will consider trades only for the right car. Trade value must be closer between $10-20k. I just spent $14k building the engine and hood and spoiler along with other stuff.
Stuff on the car along with rims and tires not including having the transmission built and clutch and price of the car.
show contact infodumJeremy
979-215-0767

The bad. Dash is cracked up like the rest of the bodys- will provide a new one.
Rear bumper got bumped into and chipped about a couple weeks ago.
Want to trade. Show me what you got. Pictures are in the attachments.

https://cimg7.ibsrv.net/gimg/ls1tech...de001b3012.jpg

https://cimg5.ibsrv.net/gimg/ls1tech...b5a1557b44.jpg

https://cimg9.ibsrv.net/gimg/ls1tech...62a72c030d.jpg


https://cimg7.ibsrv.net/gimg/ls1tech...cd4b61a567.jpg

No one?

Pm'd you

Still looking

need help
 

Hello I was looking for info on BBR this posting came up. I'm trying to looking for BBR I called them awhile back to have some work done on my car I think I seen this car before I think they built it so I am wondering if this is them? Please if this is please leave me your contact info or if you know their number please. I don't remember who I talked to but I know he said he needed to get with someone else to make some time this month to work on my car when I brought it over.