cep39

iTrader: (1)

Year: 2000
Make: Chevrolet
Model: Camaro
Price: $6000
Mileage: 114000
Private or Dealer Listing: Private Listing
Location (State): CA
Color: Red
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine

For sale is a 2000 Camaro SS prepped for track days. I just bought a Z06 and it is time for someone else to use this for what it has been built for.

Exterior:

The paint looks decent from ~10 feet, but is not in great shape with rock chips on the front bumper and a hole in the clear coat next to the grille opening, several quarter-sized holes in the clear on the driver's quarter, bubbles forming on the sail panel, a large scuff on the rear driver side corner of the bumper, and a marginally noticeable melted bumper next to the passenger side tailpipe.

Exterior mods:

plasti-dipped grille opening
custom steel tow hook in the passenger side grille opening
OEM flat hood with Trackspec heat extractor panel installed
satin berger panel

Drivetrain/Exhaust:

Stock motor with 114K miles
Rebuilt T-56 (~10k miles ago)
RAM HDX clutch
Tick adjustable master cylinder
WS6 store short shifter and custom delrin shift ****
Poly trans mount
Mobil 1 ATF trans fluid
Mobil 1 5-30 oil
Mobil 1 75-90 diff fluid
T/A differential cover
Pacesetter coated headers
custom Dr. Gas y-pipe w/out cats
Spintech catback
Quicktime resonator and quad tips

Suspension/Brakes:

TurnOne power steering pump
Custom tube and fin Derale power steering cooler
Royal Purple power steering fluid
BMR strut tower brace
Koni single adjustable shocks
H&R springs
UMI 32/21 sway bars
poly bump stops
UMI on-car adjustable pan hard bar
CTS-V brakes and 2010 camaro rotors front, stock rotors and calipers rear
(CTS calipers have been ground slightly to fit under ZR-1 wheels)
Raybestos ST47 race pads front/HPS rear
Stainless brake lines front and rear
ATF super blue brake fluid
Custom brake ducts from air dam to spindles
18" C6 deep dish wheels (CCWs NOT included in sale) with 275 nitro 555 front, 285 BFG g force T/A KDW rear street tires (front and rear nearly full tread).

Interior:
Wolfe 4 point bolt in roll bar
Corbeau FX1 pro microsuede seat (currently only has driver seat. I am actively looking for a passenger seat of some kind)
RJS 5 point cam lock harness

Extras:

pair of drilled 2010 camaro front rotors (hub holes bored to fit fourth gen)
pair of drilled fourth gen rear rotors
OEM 5th gen front pads
stock head unit (custom block off plate in place now, all speakers currently installed)
spare serpentine belt
stock fourth gen front calipers and rotors

Car is located in Orange County and is currently sitting in my garage waiting for a buyer, no longer being driven. There are no mechanical issues with the car, and all listed fluids have 1-2 track days on them. I hope this will go to a home where it will see track time; it does surprisingly well for a big heavy antique and has been very reliable with no overheating issues on track even in CA desert heat in the middle of summer.

Looking to get $6000.

Please PM me or text me at 609.314.100Five with questions, and thanks for looking.

cep39

iTrader: (1)

sold!