1999 403 2 Stage Nitrous Z28 Camaro
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Feb 2009
Location: DFW area
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
1999 403 2 Stage Nitrous Z28 Camaro
Year: 1999
Make: Chevrolet
Model: Camaro
Price: $12000
Mileage: 149500
Private or Dealer Listing: Private Listing
Location (State): TX
Color: Black
Transmission: Automatic
Drivetrain: Rear Wheel Drive
Well, the time has come to sell my car. It's been a blast going through all the different mod stages and I hope whoever gets it next, enjoys it as I have. Also, hope they enjoy one of the new stages that even I haven't been able to experience yet. I'll even give you almost every mod receipt and dyno sheet it's had since I first got the car. When I first got the car, the only mod it had was a flow master muffler. So, now to the mod list. It's a nitrous car, so the sale will determine what all comes with it. BTW, it still has working A/C, Heater, power windows, power locks, power driver seat, and cruise control. I will entertain trades plus money from your side, just post up what you have. If it doesn't sell, I will start to part out the car.
This is a Dyno vid of when it was on a 175 or 200 shot plate kit trying to iron things out..
Engine 403 ci Stroker
Gm LS2 Aluminum Block (bored .005")
Callies Comp Star Crank (4.00 stroked) 24x
Callies Comp Star Connecting Rods (6.125")
Mahle Forged, coated, short skirt stroker pistons (4.005")
Mahle Rings
Custom Cam 23x/25x 62x/62x lobe 113
GM LS3 Cylinder heads (mildly ported)
Ferrea Stainless Steel Valves
Comp Cams Chromoly Pushrods
Comp Cams Roller Trunnions
GM LS7 Lifters
GM LS3 Head Gaskets
ARP Head Bolts
KaTech Timing chain
LS3 intake manifold (port matched to cylinder heads) Direct Port Nitrous outlet
Anodized red Fast Fuel Rails
Fast 92mm Throttle body with Nitrous Outlet plate kit
GM oil pump (ported and modified)
Drive Line
Trans -Stage 4 4L80 forward manual shift with low Tbrake built by Jakes Performance
Converter - Mike's Trick Shift Pro Billet 3600 Multi disc (handles WOT lock up)
Drive Shaft - 3in Chrome Moly (may be a 3 1/2 in, will verify as soon as I get a chance)
Rear end - Strange Dana 60 with 3.54 gears (I have 4.10 gears that I can throw in as well)
35 spline axles
Trutrac
Exhaust - 3in Y into a 4in single, over the axle, into a spintech dual outlet
http://www.mufflex-performance.com/1...lowmaster.html
http://www.mufflex-performance.com/9...ad-y-pipe.html
Suspension
BMR Sub-frame connectors (weld-in)
Spohn solid motor mounts
Spohn pro series torque arm with drive shaft safety loop,
ARC Rear lower control arms
ARC pan hard bar
Yellow Koni adjustable shocks http://www.stranoparts.com/partdetai...D=20&ModelID=7
Strano springs all the way around. http://www.stranoparts.com/partdetai...=113&ModelID=7
Wheels - Billet Specialties 15x10 rear with MT Pro's 275/60
17x7 front with 225/50/17
Stand a lone fuel system
Two 15lb Nitrous Outlet Bottles
Dual Billet Aluminum Bottle Bracket With Pressure Activation Switch
http://www.nitrousoutlet.com/nitrous...on-switch.html
I can get you more pics of the exterior paint as it will need one to make it look good.
Last edited by jgarza54; 08-25-2015 at 09:26 AM.