1998 Z28 Clean Hardtop, Forged 375, Moser 9in, t56 with new Monster Clutch
09-12-2015, 11:52 AM
#1
Teching In
Thread Starter
Join Date: May 2010
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
1998 Z28 Clean Hardtop, Forged 375, Moser 9in, t56 with new Monster Clutch Year: 1998
Make: Chevrolet
Model: Camaro
Price: $8000
Mileage: 93000
Private or Dealer Listing: Private Listing
Location (State): TX
Color: White
Transmission: Manual
Drivetrain: Rear Wheel Drive
Engine-Machined and assembled by Faerman Racing Engines ~1000 miles on engine.
-Fully machined 6.0 iron block bored .060 over
-Arp head bolts and arp main studs
-Callies compstar 3.625 stroke Crank
-Forged Eagle H-Beam rods
-Mahle Pistons with Hell Fire rings
-243 hand ported cylinder heads done by Faerman Machine with 2.02/1.60 stainless valves installed.
-The heads have dual valve springs (Brian Tooley) with Chromoly pushrods and the rockers have the upgraded trunions.
-238/242 duration .609,.611 lift 112 LSA camshaft
-LS6 intake manifold
-Edlebrock 1 3/4" stepped to 1 7/8" headers
-Catted y-pipe with Dual Cutouts
Drivetrain
-Stock t-56
-Monster Stage 3 Clutch with new slave installed ~ 500 miles ago
-Tick master cylinder with remote bleeder
-Moser 9in rear with 3.89's and Locker Diff. (the rear does have some gear whine above 40mph, recently pulled the chunk and inspected all bearings and gear pattern. Every thing looked good).
Suspenion
-UMI torque Arm
-UMI rear lower control arms
-UMI Panhard bar
-Qa-1s all the way around
-Weld in subframe connectors
I have the clear title in hand, Serious inquires only please. I am Asking 8,000 OBO.
Attachment 722545
Attachment 722546
Attachment 722547
Attachment 722548
Last edited by Tninl98; 09-15-2015 at 06:01 PM.
