98z28 Race Car for Sale
05-23-2006, 02:39 PM
#1
TECH Enthusiast
Thread Starter
Join Date: Oct 2002
Location: Chicago
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
98z28 Race Car for Sale Price has been lowered to $21K1998 Z28
33,000 miles-I've had since new
Borowski 347 Solid Roller set up
cam - 254-262 .704 - .712
14:1 comp
GRP Aluminum Rods
Diamond Custom Pistons
ETP 5.3 liter heads
GMPP carb style intake
Accel 4150 TB
Made 610hp @7200 and 484ft at 5600 on their engine dyno
BS3 Injection
Custom made step headers and coated
(About 10 passes on the motor)
Trans is a brand new Coan light weight 350 with cert Ultra-Bell housing / T- brake and a coan 5000 stall converter
Rear is a strange 12 bolt with a spool (4:88) being changed to a 4:56...was crossing too high and out of the power band.
Hal's on all 4 corners with AutoFab coil overs in the rear.
Billingslley Anti roll bar
Aerospace Street Style brakes
Billingsley manual rack
BMR K-Member
2.5 Gallon Fuel Cell
Optimum Yellow in the trunk with push off kill in the bumper(comes out by license plate) so no hole in the bumper.
Bogart Rims
Custom Made Chrome molly cage just cert to 8:50
Best to date is 10.24 at 132 with a 1.39 at 3250 lbs (Car weight is about 3,050)
Should run 10.0's when dialed in and with new gear.
Front end was just repainted and a black billet grill was added...also had him paint the mirrors. Car is very clean.
I've got a baby due in 2 months and just don't have time anymore.
$25,000 (or best reasonable offer)
email andrewsptg@ameritech.net for more info.
Please no tire kickers.
33,000 miles-I've had since new
Borowski 347 Solid Roller set up
cam - 254-262 .704 - .712
14:1 comp
GRP Aluminum Rods
Diamond Custom Pistons
ETP 5.3 liter heads
GMPP carb style intake
Accel 4150 TB
Made 610hp @7200 and 484ft at 5600 on their engine dyno
BS3 Injection
Custom made step headers and coated
(About 10 passes on the motor)
Trans is a brand new Coan light weight 350 with cert Ultra-Bell housing / T- brake and a coan 5000 stall converter
Rear is a strange 12 bolt with a spool (4:88) being changed to a 4:56...was crossing too high and out of the power band.
Hal's on all 4 corners with AutoFab coil overs in the rear.
Billingslley Anti roll bar
Aerospace Street Style brakes
Billingsley manual rack
BMR K-Member
2.5 Gallon Fuel Cell
Optimum Yellow in the trunk with push off kill in the bumper(comes out by license plate) so no hole in the bumper.
Bogart Rims
Custom Made Chrome molly cage just cert to 8:50
Best to date is 10.24 at 132 with a 1.39 at 3250 lbs (Car weight is about 3,050)
Should run 10.0's when dialed in and with new gear.
Front end was just repainted and a black billet grill was added...also had him paint the mirrors. Car is very clean.
I've got a baby due in 2 months and just don't have time anymore.
$25,000 (or best reasonable offer)
email andrewsptg@ameritech.net for more info.
Please no tire kickers.
Last edited by Silvr98z28; 06-26-2006 at 11:39 AM.
