Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build - LS1TECH



Vehicles Wanted Looking for a specific vehicle? Post a WANTED thread here. DO NOT post them anywhere else!

Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build

Reply
 
Thread Tools Search this Thread
Old 08-31-2016, 04:12 PM   #1
Teching In
Thread Starter
iTrader: (1)
 
munkieZ's Avatar
 
Join Date: May 2015
Location: La Habra, Ca. 90631
Posts: 7
Default Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build

Trying to replace my 01 Z28 that was totalled back in February. Still haven't gotten any settlement offer from the insurance company but I really could use a vehicle to at east start building back toward normal again as I wait on the lawyers to work their magic.

I have limited funds to say the least, but am well-off in tools and parts to trade or sell (with funds put towards buying a good amount of potential).

I'm sure I'll miss some items that I have available for sale or trade, but ill pupdat this thread a I remember them:

OTC Encore MidRange Scanner with Bravo 2.0 update (comes with charging cable, usb cable and Bravo 2.0 cpompatible OBD2 cable
Bosch Mastertech Vehicle Communication Interface (comes with power cable, usb cable, MVCI compatible OBD2 Cable
Diablosport Tuner plus PCM that its currently married to. (Just needs to bepowered up with pcm to reinstall the factory tune and then both are free to separate)
BCM
ABS Module
3.91 gears for 10bolt
Rearend bearing set
Oil Cooler & Manual Steering upper radiator hose for OEM ps bs delete/upgrade/relocation
3 pairs of 4th gen fbody ttops
one full ttop conversion kit, 1/2 of a 2nd set
rack & pinion (never installed)
ebony interior pieces, just needs the 2 lower front sections to be complete
mild ported/polished ls1 oe throttle body
cmaro wing with rs-style spoiler (with end pieces and 3rd brake lens)
Berger panel, silver painted "camaro" prep work very well done by hand
aPair of c6 base model corvette fenders
custom sub enclosure (fits in ttop storage area) 2 12" subs and 500waqtt amp
interior bezels (2tone painted pewter/black to match the body of the 01 z28 cube)
flowmaster 80series with fatty angle cut chrome tps
passenger window glass
02 sensor
pir of gray front seats
kyb excel shocks - rear
rear brake calipers
6 jugs of autozone dexcool (concentrated)

will update more parts a little later

for the most part the parts are for 4th gen fbodies, z28s specifically 98-02,. pm me with questions, interest, etc
Attached Thumbnails
Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-12321476_932110230197957_5614061013198467642_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-13254532_1030382417037404_191795857678206200_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14063816_1097344893674489_7584299748606538993_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14142060_1102243449851300_1829600198980873327_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-13879439_10153729337941496_4437784789892309551_n.jpg  

Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14141990_10153729328811496_4348480023925513928_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14095893_10153729332376496_1032738407182949485_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14095772_10153729334696496_943726302154505073_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14095944_10153729334886496_3373393670752206976_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14184443_10153729331686496_6439436223537304504_n.jpg  

Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14089234_10153729335791496_5226837858480578868_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14100283_10153729345241496_2870742656880570677_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14199209_10153729345991496_3435462978354075760_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14141805_10153729332716496_4915722806837806661_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14141898_10153729334056496_1668559017248490932_n.jpg  

Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14102369_10153729336016496_3313596309328647319_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14117895_10153729331396496_8120973122839021303_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14202593_10153729334451496_8305823838141639532_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14102456_10153729329221496_5918518862144110748_n.jpg   Seeking 3rd or 4th Gen F-Body Roller+and/or TPI, LT1, or LS1 to build-14141899_10153729329846496_6230938407700348110_n.jpg  

munkieZ is offline   Reply With Quote
Old 08-31-2016, 04:17 PM   #2
Teching In
Thread Starter
iTrader: (1)
 
munkieZ's Avatar
 
Join Date: May 2015
Location: La Habra, Ca. 90631
Posts: 7
Default

ta performance girdle diff cover for 10bolt rear
random turbo parts off of an audi/vw, mazda
cowl induction - fiberglass (off of 77 el camino)
bed upper chrome trim off of 77 el camino (one corner piece away from completing upper trim)
munkieZ is offline   Reply With Quote
Old 10-30-2016, 01:43 PM   #3
Teching In
 
Join Date: Sep 2016
Posts: 0
Default

Michael Stone is offline   Reply With Quote
Old 11-04-2016, 05:28 PM   #4
On The Tree
iTrader: (6)
 
All Pontiac WS6's Avatar
 
Join Date: Feb 2014
Location: Lawrenceville, Ga
Posts: 112
Default 98 Trans Am

I have a 1998 Red Trans Am roller. Lots of goodies on it.
No motor or trans.
All Pontiac WS6 is offline   Reply With Quote
Old 12-03-2016, 09:54 PM   #5
Teching In
iTrader: (1)
 
Join Date: Mar 2015
Location: West deptford NJ
Posts: 38
Default thread still active

this for $500

97lt1stroker is offline   Reply With Quote
Old 12-05-2016, 10:29 PM   #6
Teching In
Thread Starter
iTrader: (1)
 
munkieZ's Avatar
 
Join Date: May 2015
Location: La Habra, Ca. 90631
Posts: 7
Default

No longer searching for a rolling shell.
I now have a 94 z28 that needs an lt1 & MT. 6speed preferred, i may entertain the idea of a 5speed for now
munkieZ is offline   Reply With Quote
Old 12-05-2016, 10:55 PM   #7
Teching In
iTrader: (1)
 
Join Date: Mar 2015
Location: West deptford NJ
Posts: 38
Default

Quote:
Originally Posted by munkieZ View Post
No longer searching for a rolling shell.
I now have a 94 z28 that needs an lt1 & MT. 6speed preferred, i may entertain the idea of a 5speed for now
I am parting my car. I still have the LT1 383 I pulled with AFR heads. motor is seperated(heads off) selling short block with forged internals and heads , together or seperate. have harness , pcm, everything but lifters and pushrods. motor made 395 RWHP on dyno.
97lt1stroker is offline   Reply With Quote
Old 12-08-2016, 08:23 PM   #8
TECH Fanatic
iTrader: (8)
 
transamfreak01's Avatar
 
Join Date: Jan 2006
Posts: 1,767
Default

I have a Texas speed built 408 nitrous car, all new motor, trans, rear end, suspension and electronics. Everything is literally brand new. Shoot me a pm of interested and I'll send you pics, a list of everything and anything else you want to know. Like I said everything is brand new I just lost interest
transamfreak01 is offline   Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
FS: 2007 TBSS 1SS (trade?) yota Vehicle Classifieds 8 12-18-2016 05:45 PM
Complete Newbie - which cable? TheNutDriver PCM Diagnostics & Tuning 3 10-17-2016 03:16 PM
If you own an OBD1 LT1 (1993-1995), you should have a data logger. Here's how.... hrcslam LT1-LT4 Modifications 15 03-19-2016 04:26 PM
Misc 4th gen parts needed Mean87SS Parts Wanted 5 12-02-2015 06:43 PM
lots of 4th gen f-body parts FS in dallas texas STS95T/A Texas Members 8 11-18-2015 09:16 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 10:07 PM.


 
  • Ask a Question
    Get answers from community experts
What's your question?
Send