LS1 SS or WS6, MUST be 400+RWHP....
08-03-2006, 04:23 PM
#1
Teching In
Thread Starter
Join Date: Oct 2005
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
LS1 SS or WS6, MUST be 400+RWHP.... I'll be in the market in about 20 days and am looking for the following:
LS1 SS or WS6
Supercharged or N/A
BLACK LEATHER
M6 or A4 will be dependant on each individual car
Heads/Cam
Must be 400+RWHP (I don't know how to work on cars and do not want to pay all the labor rates I did on my supercharged T/A.)
FULLY MODDED (engine, suspension, rear end, tranny, etc...)
Less than 60K miles
T-TOPS ARE A MUST
MAY consider a vert
Definately cammed (LOVE LUMPY IDLES)
If A4, stalled
If M6, clutched
Must have all supporting mods for whatever RWHP it's putting out
Basically a car that is complete and ready to enjoy
Aftermarket rims/tires are a PLUS
Please let me know what you have, via pix/mod list. Please reply to this post as well as email me. My email addy is jefflevander@tds.net
Im limiting myself to the $17K range, but will pay more if it's for something I absolutely cannot live without.
Jeff
LS1 SS or WS6
Supercharged or N/A
BLACK LEATHER
M6 or A4 will be dependant on each individual car
Heads/Cam
Must be 400+RWHP (I don't know how to work on cars and do not want to pay all the labor rates I did on my supercharged T/A.)
FULLY MODDED (engine, suspension, rear end, tranny, etc...)
Less than 60K miles
T-TOPS ARE A MUST
MAY consider a vert
Definately cammed (LOVE LUMPY IDLES)
If A4, stalled
If M6, clutched
Must have all supporting mods for whatever RWHP it's putting out
Basically a car that is complete and ready to enjoy
Aftermarket rims/tires are a PLUS
Please let me know what you have, via pix/mod list. Please reply to this post as well as email me. My email addy is jefflevander@tds.net
Im limiting myself to the $17K range, but will pay more if it's for something I absolutely cannot live without.
Jeff
Last edited by BLWN94LT1; 08-03-2006 at 05:37 PM.
08-06-2006, 03:24 PM
#5
11 Second Club
iTrader: (1)
Join Date: May 2005
Location: Cleveland, OH
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Hi Jeff,
I live in OH, so I am not exactly local.
But I am looking at selling my '01 Camaro SS.
It's a SOM M6 with T-Tops, 40200 miles on it.
As far as mods go, here's what it's got:
Lid
SLP LTs
Corsa exhaust
Pro 5.0 shifter
Spec Stage 3 clutch
SFCs
Hotcam (112 LSA) nice lopey idle, well enough behaved for painless street driving.
new shocks in the rear (stock type)
airbags in the rear
NX LS1 EFI wet kit (jetted for 100 shot)
MSD window switch, FPSS, WOT switch, purge
10lb bottle mounted over driveshaft tunnel (awesome billet bottle bracket)
Dyno tuned
All mods installed last seaon, when I bought the car.
The car runs low 12s n/a, I hit 11.96 @ 123.2 mph on the 100 shot (as you can see, there is room for improvement)
Here's a quick idle vid. The quick look at the screen shows my car's dyno run with a 100 shot.
http://video.ls1tech.com/video/529EE...50A53D4FF5.htm
I have full documentation of everything!
Here's a quick 1/4 mile vid:
http://video.ls1tech.com/video/b5610...5bd6ee0bbe.htm
That's on used street tires. You can do better!!!
All in all it's a fast, yet safe setup with great street manners!
I'll sell for $15500, or somewhere in that area.
I live in OH, so I am not exactly local.
But I am looking at selling my '01 Camaro SS.
It's a SOM M6 with T-Tops, 40200 miles on it.
As far as mods go, here's what it's got:
Lid
SLP LTs
Corsa exhaust
Pro 5.0 shifter
Spec Stage 3 clutch
SFCs
Hotcam (112 LSA) nice lopey idle, well enough behaved for painless street driving.
new shocks in the rear (stock type)
airbags in the rear
NX LS1 EFI wet kit (jetted for 100 shot)
MSD window switch, FPSS, WOT switch, purge
10lb bottle mounted over driveshaft tunnel (awesome billet bottle bracket)
Dyno tuned
All mods installed last seaon, when I bought the car.
The car runs low 12s n/a, I hit 11.96 @ 123.2 mph on the 100 shot (as you can see, there is room for improvement)
Here's a quick idle vid. The quick look at the screen shows my car's dyno run with a 100 shot.
http://video.ls1tech.com/video/529EE...50A53D4FF5.htm
I have full documentation of everything!
Here's a quick 1/4 mile vid:
http://video.ls1tech.com/video/b5610...5bd6ee0bbe.htm
That's on used street tires. You can do better!!!
All in all it's a fast, yet safe setup with great street manners!
I'll sell for $15500, or somewhere in that area.
Last edited by meatfoam; 08-07-2006 at 10:47 AM.
08-07-2006, 08:39 AM
#6
Launching!
iTrader: (18)
Join Date: Nov 2005
Location: jupiter, florida
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/475538-98-ws6-m6-t-top-tons-mods-sale-fl.html
TAKE A LOOK AT MINE, PM ME IF YOUD LIKE MORE PICS!
TAKE A LOOK AT MINE, PM ME IF YOUD LIKE MORE PICS!
Trending Topics
08-13-2006, 11:41 PM
#8
TECH Fanatic
iTrader: (1)
Join Date: May 2003
Location: St Clairsville, Oh
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
99 Trans Am M6 Black. $12,750 OBO
77000miles on the car and 3000 on the motor, tranny and rear end.
Motor. 9:1 CR 410rwhp N/A. Ready for the spray or FI
6.0 30 over diamond -15cc pistons .024top ring .030 bottom ring.
Forged rods and arp rod bolts stretched to .005
SDPC ls6 heads 918 spings and arp studs head studs and main studs. Thunder Racing ported oil pump.
228/228 .588/.588 114lsa cam.
LS6 manifold, S2 and lid.
Tube K member
Hooker headsers with a QTP Y pipe with dual cutouts with a borla cat back.
Fully rebuild M6 tranny with all the goodies. Mccleod Twin-Disk BMR ajustible torque arm and pro 5.0 shifter
BMR SFC install before i did any drag racing.
Denis Nitrous ready D/S 1350
8.8 rearend with 3.73 gears and 1/2 studs.
6 point bolt in cage.
Eclipes 5442 head unit
3.1 EQ
Diamond 6.1 door speekers
750X Rockford am
10 pocked sub.
Any questions please call 817 8916734 Justin. Must sell
http://www.autotrader.com/fyc/vdp.j...5000&cardist=18
77000miles on the car and 3000 on the motor, tranny and rear end.
Motor. 9:1 CR 410rwhp N/A. Ready for the spray or FI
6.0 30 over diamond -15cc pistons .024top ring .030 bottom ring.
Forged rods and arp rod bolts stretched to .005
SDPC ls6 heads 918 spings and arp studs head studs and main studs. Thunder Racing ported oil pump.
228/228 .588/.588 114lsa cam.
LS6 manifold, S2 and lid.
Tube K member
Hooker headsers with a QTP Y pipe with dual cutouts with a borla cat back.
Fully rebuild M6 tranny with all the goodies. Mccleod Twin-Disk BMR ajustible torque arm and pro 5.0 shifter
BMR SFC install before i did any drag racing.
Denis Nitrous ready D/S 1350
8.8 rearend with 3.73 gears and 1/2 studs.
6 point bolt in cage.
Eclipes 5442 head unit
3.1 EQ
Diamond 6.1 door speekers
750X Rockford am
10 pocked sub.
Any questions please call 817 8916734 Justin. Must sell
http://www.autotrader.com/fyc/vdp.j...5000&cardist=18
08-20-2006, 10:36 PM
#12
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/561660-modded-1999-t-az.html
can work with price, i need the money for school.
can work with price, i need the money for school.
08-21-2006, 02:51 PM
#13
Teching In
Thread Starter
Join Date: Oct 2005
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Got Me SOM
check my car out, let me know if you're interested.
Jeff
08-21-2006, 02:52 PM
#14
Teching In
Thread Starter
Join Date: Oct 2005
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FIREHAWK#608
Hey man, glad to see you getting back in the saddle.
I just twin turbo'd mine. 550+rwhp- If you feel like chatting feel free to call.
~Joshua 678/492/6843
I just twin turbo'd mine. 550+rwhp- If you feel like chatting feel free to call.
~Joshua 678/492/6843
Jeff
08-22-2006, 12:09 PM
#16
Teching In
Thread Starter
Join Date: Oct 2005
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by VSGLS1
Jeff
08-22-2006, 02:50 PM
#18
FormerVendor
iTrader: (8)
Join Date: Dec 2001
Location: Melbourne, FL
Posts: 2,179
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BLWN94LT1
What is the RWHP as well as your bottom dollar, cash price? Feel free to email me at jefflevander@tds.net
Jeff
Jeff
08-23-2006, 09:04 PM
#20
Banned
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BLWN94LT1
Hey Josh, your car sounds AMAZING!! Email me some pix/video's of whatever you have! jefflevander@tds.net I look forward to hearing from you!
Jeff
Jeff
It was taken at 10pm. Very dark video, more of a soundclip. Cammed: 236/236 112LSA Incon Twin Turbo through an open y-pipe. ~Joshua
http://video.ls1tech.com/video/bf2a5...0800d0ccde.htm