Racers Edge Tuning Introduction
#1
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Racers Edge Tuning Introduction
Since I am now a vendor on LS1tech I will introduce myself, and my business. My name is Greg and I am the owner of Racers Edge Tuning. I have been tuning for the last nine years and have been in business for six years. I tune with HP Tuner, FAST, Big Stuff3, and SCT. For the carb. stuff my employee handles that, and he has also been tuning with HP Tuner for the last five years. People that know me will tell you I love what I do, and its still a hobby. I will always be into racing, its not something I do just to make a buck. I know a lot of people know me for building/tuning lots of Fast Fords, but we also do a bunch of GM stuff. I have four full time employees, three being heavy line. I own 2 Dynojet224 in ground dyno's along with a DTS engine dyno. We have 5 lifts, stock many parts, and the shop is under 24hr. video surveillance.
I took some pictures of what the shop looked like today, no photoshoot set up or staging of cars. I just finished tuning the white truck and if you look in the back ground you will see LS1tech on the monitor along with a pic of my turbo car from today.
I look forward to meeting you guys. You can reach me at www.racersedgetuning.net, greg@racersedgetuning.net, or pm me if you have any questions or would like to set something up. The shop number is 562-622-2508. I will put some more pictures up later....
I took some pictures of what the shop looked like today, no photoshoot set up or staging of cars. I just finished tuning the white truck and if you look in the back ground you will see LS1tech on the monitor along with a pic of my turbo car from today.
I look forward to meeting you guys. You can reach me at www.racersedgetuning.net, greg@racersedgetuning.net, or pm me if you have any questions or would like to set something up. The shop number is 562-622-2508. I will put some more pictures up later....
Trending Topics
#11
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Pic and video of mine.
http://www.youtube.com/watch?v=fL5USC1Pjgw
Depends on the mods that is done to it, if it has a cam its a little more time consuming since the VE table needs to be tuned along with the MAF. pm me with your mods and I will get back to you. You would have to set up a appt.
#15
TECH Resident
iTrader: (5)
Join Date: Mar 2009
Location: Gardena, Ca
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I might take it out this Thursday. Last week we took out a customers car we built and it went 5.7@123.
Pic and video of mine.
http://www.youtube.com/watch?v=fL5USC1Pjgw
Pic and video of mine.
http://www.youtube.com/watch?v=fL5USC1Pjgw
#16
11 Second Club
iTrader: (1)
Hey guys just thought I'd check in and vouch for Greg.
When I got my headers, a full 3" and Svede OTR air intake on I took it to greg to get it tuned.
Mine put down 389/395 after the tune.
Great guy as well!
http://www.youtube.com/watch?v=qwUiAXSM3Yg
When I got my headers, a full 3" and Svede OTR air intake on I took it to greg to get it tuned.
Mine put down 389/395 after the tune.
Great guy as well!
http://www.youtube.com/watch?v=qwUiAXSM3Yg