weld prostar Q's
 

a couple questions i want to verify the answer to...

i have an opportunity to get a 15x4 (2nd one was wrecked) and a pair of 15x10 prostars w/drag radials already on for $100...

1.) i read that the 15x4 wheels wont fit, why?
2.) for the backspacing on the 15x10s, i read it should be 7.5. what if it isnt that deep?? just stick out the side of the car more?
3.) also will i have to grind the calipers since my car is a '96?? (v6 w/'95 z28 rearend btw)

also, just let me know anything else that i should look for or need to do to make them fit (if possible)



thanks in advance

the fronts you'll need longer studs and a little grinding ,the rear should fit with min to know grinding ...camaros require 7.5 bs T/A's can get away with 6.5's for 100 bucks try them out and see where you are ...

you want 15x3.5's for the fronts ideally ..

yea i kinda figured that after researching a little bit. i might pick up some since ill have to buy a second one anyways

^^ i would do that ...get longer studs up front and a small spacer and you should be good to go ..

good deal
 

buy the wheels and if you dont like them sell them to me i will take them