Guuseppe'sTA

ss55539

Nice. I've been considering these myself in the polished. So you had no hammering or anything?

Guuseppe'sTA

Rear end veiw sitting on stock height Bilstein Shocks 315/35/17 Nitto G2

ss55539

did you have to modify anything to get the rears to fit?

Guuseppe'sTA

As long as you stay stock height your good these cars are sometimes a little weird sometimes you might have to put them on drive 5 miles come back home pull one wheel at a time off and say you see a small little scuff mark on the inside of the inner fender well then you can lightly give it a small little love tap with a rubber mallet other then that just be careful of raising the car because of the bumpstops when you see your car on a lift you might even see one side of your stock rims actually rub up against the bumpstops and then when you lower the car back on the ground its back to normal and not touching the wheel so yes the 315/35/17 will be tight but I assure you if your keeping it stock height enjoy the ZR1s good luck man any questions dont hesitate

ss55539

Any rubbing or modifications?

Guuseppe'sTA

No rubbing or any modifying as long as you stay stock height and go with a 315/35/17 that isnt super wide I know for sure the the Nitto G2 will fit perfect, but mabye the Eagle Goodyears are a little bit wider and it could rub the tire so then you beat in the inner fender well just a bit until it fits flush without rubbing

F-Body International

I've been looking at the C7 Z06 17/18" staggered set for my '98 Trans Am. I just ordered the front Strano brake kit so upsizing from a 16" wheel is necessary for me right now.

Will 275/40-17 (front) and 285/35-18 (rear) work for these wheels? I copy/pasted the wheel offsets below.

TheeCamaroKid

Please look into this, looks like a scam too me.

OEWheels-Tech

Please do not use the contact information or click the links provided above for Brian at OE Wheels. We do have a Brian in our Wholesale Department who is great to work with, but the above information is not his. We think this is a virus and want to make sure that this information is not used to attempt to contact OE Wheels.

Tuskyz28

Toronto LT1

iTrader: (2)

reaper68

iTrader: (3)

Do you guys think the 18 10.5 stingrays will be in stock anytime soon? Been waiting on my order from jegs for a bit now. They are a nice looking wheel, so hopefully sooner than later.

OEWheels-Tech

Hey There, thank you for your interest in our stingray wheels. I will be happy to check the status of their arrival for you. Do you have the 7 digit UPC? We have a few different styles of the stingray wheels. If you send me the UPC or a link to the exact wheel you are looking at, that would be great. I just want to make sure that I give you accurate information. Thank you!

99Silver6.0

iTrader: (2)

17x9.5 chrome ZR1's with bowtie caps wearing 275/40/17 BFG SportCompII

2JAWZ

iTrader: (1)

They need to make another run of these in 18's!!!!!!

TheNutDriver

iTrader: (1)

Im thinking of buying these for my 01 WS6.

The rears don't fall within the offset specs in the sticky at the top of here...will they need BFH?

https://www.oewheelsllc.com/Corvette...heels-Chrome_2

Thanks.

blackbyrd

iTrader: (14)

I havnut used it on my OE wheels , but when I had my polished TT2's I used wenoil. worked GREAT!

ss55539

do the weight of your wheels vary with production runs? seems like every person i ask i get a different weight, including the couple emails directly to oewheels?

jdwtx85

Oe wheels.
can you tell me the depth difference of the dish for the c5 deep dish wheels
17x9.5
18x9.5
18x10.5
thanks