17X11's out back
 

Here we go i sold my zo6's before they got on the car and i'm now looking at some torque thrust 2's for the rear of my trans am. i have the eibach prokit all the way around and i have the stockers still.

I wanna run 315/35/17 nitto 555r's out back.

The wheel specs are:
17x11
offset: 45
Backside:7 3/4
Bolt circle 5x4 3/4

Due to the offset what is going to be necessary to get this to fit? will i have to roll the fenders,do the bfh mod, put the stock springs on? Let me have it tell me whats involved.
:usa:

ttt please

May have to do a little inner wheel well massaging, and possibly roll the fender lip depending on if you are lowered.

Try for a 50 mm offset, it's a better fit