adrynalinjunkie

iTrader: (4)

Well I decided to play it safe and order the new black center RTS Welds. Does anyone know the correct shank lenth for the lug nuts? Ie how deep is the stud hole in these rims?

YURVIEW

iTrader: (127)

Can't help u with your Que, but wondering who u bought wheels from...... looking to buy some as well.

wheelczar

1/2 inch shank length with a washer. Standard mag lug nut diameter

Camaro396

iTrader: (14)

If you're using stock studs you'll need 12mm x 1.5" RH studs. Weld-601-1452 will work great.

http://www.summitracing.com/parts/WLD-601-1452/

sweet99ss

iTrader: (41)

Bumping this way back from the dead. I bought my car with rts wheels on it and the guy told me he kept having problems with lugs backing off. So yesterday I pulled a few lugs off and noticed there is not much thread coming out of the wheel. I'm guessing I need the lugs posted above so they actually screw on the lug inside the mating surface of the wheel?