SHovV

iTrader: (1)

looks killer man

A.P.D.

iTrader: (1)

WOW !!! I know this is old thread, but i just bought myself a 2002 WS6 Silver T/A and did some googling on the innerwebz and looky what i find Maybe a dumb question, but are the RPM 505's still available ? I love that wheel ...

FCar2000TA

iTrader: (7)

I know I am bringing this back from the dead...but what was the offset of these wheels? It looks like stock offset.

A.P.D.

iTrader: (1)

... certainly not the case here, the wider the wheel, the deeper the offset ...

FCar2000TA

iTrader: (7)

ah. I thought offset meant where the lip of the wheel is in relation to the axle bolts.

A.P.D.

iTrader: (1)

... yeah, it can be a little misleading, basically offset/back spacing is measured from the mounting surface to the inner side of the rim edge ... so if you're curious just take any wheel and lay it face down, lay a straight edge across the rim lip and measure from that straight edge down to the mounting/hub surface of the rim and that's the actual offset/backspace of the rim ...

FCar2000TA

iTrader: (7)

I will just wait until the mini-tub is finished, then see if stock offset wheels will fit, if they are widened to 12.5"

firebird5766

Hey I was hoping to have my car done the same way can you send me a parts list and what I would need to have modified to make the Wolfe kit I appreciate any help

FCar2000TA

iTrader: (7)

Haven't gotten around to getting this all welded in, but here is the parts list so far:
-Mini-tubs
-Coil-overs
-Rear Control Arm Relocation brackets