17x11 7.75"bs or 8"
08-16-2012, 10:43 AM
#1
On The Tree
Thread Starter
iTrader: (17)
Join Date: Apr 2006
Location: Streets of the 405
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
17x11 7.75"bs or 8" Need a little guidance from the wheel pros here. Which backspace fits a stock length rearend in a 4th gen camaro better? Pics are good!
08-16-2012, 03:13 PM
#2
A 7.75" BS will have the wheels even with the quarters. You will need to roll the fender lips with that setup if you are lowered or you will risk cutting the tire. I prefer this setup.
Going with a 8" BS will tuck each wheel in 1/4". Almost similar to the stock setup.
Going with a 8" BS will tuck each wheel in 1/4". Almost similar to the stock setup.
09-01-2012, 09:20 PM
#4
TECH Regular
iTrader: (2)
Join Date: Aug 2004
Location: Brewton AL
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
reall7y- it is a quarter of an inch...very littl difference. You'll need and adj panhard to perfectly center the rear..and prolly hammer the inner fenderwells.
I ran 7.75 BS and didn't have to hammer mine- but I rolled the outer fender lip to be safe.
I ran 7.75 BS and didn't have to hammer mine- but I rolled the outer fender lip to be safe.
