Is anyone running c6z06 cup wheels on a fbody??
#2
#4
Your going to be hard pressed to find these on a fbody,
i have these wheels on my c6, the problem is they are very big wheels, especially for the front.
20x12 in the rear and 19x10 in the front, oe sizes
fitting that kind of size on a fbody seems like a bit too much for those cars, fbodys are meant for 15-18, anything else looks a bit too odd imo. maybe it bc they were built back when the factory norm was 17s.
Heres my vette on cup wheels, and my fbody on 15,17 rts's
sorry for the dark pic.
i have these wheels on my c6, the problem is they are very big wheels, especially for the front.
20x12 in the rear and 19x10 in the front, oe sizes
fitting that kind of size on a fbody seems like a bit too much for those cars, fbodys are meant for 15-18, anything else looks a bit too odd imo. maybe it bc they were built back when the factory norm was 17s.
Heres my vette on cup wheels, and my fbody on 15,17 rts's
sorry for the dark pic.
#5
12 Second Club
Join Date: Sep 2005
Location: Bucks County, Pa.
Posts: 4,273
Likes: 0
Received 0 Likes
on
0 Posts
The 5th gen Z28 wheels would not be bad either, despite them being 19s.
I wish that OE Wheels would make these in an 18 x 10.5 square set up for our cars with the proper backspacing/offset (NO spacers needed).
I wish that OE Wheels would make these in an 18 x 10.5 square set up for our cars with the proper backspacing/offset (NO spacers needed).
#6
TECH Fanatic
iTrader: (3)
I had though about running 4 OEM 19x10(40mm offset) front wheels with the machined face/silver port finish, but I just can't over the feeling that 19" wheels would be too big, a Trans Am can pull it off but not so much with a Camaro.
Last edited by LT4vert; 05-04-2015 at 10:45 PM.
#7
On The Tree
Join Date: Apr 2015
Location: Lethbridge AB
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Your going to be hard pressed to find these on a fbody,
i have these wheels on my c6, the problem is they are very big wheels, especially for the front.
20x12 in the rear and 19x10 in the front, oe sizes
fitting that kind of size on a fbody seems like a bit too much for those cars, fbodys are meant for 15-18, anything else looks a bit too odd imo. maybe it bc they were built back when the factory norm was 17s.
Heres my vette on cup wheels, and my fbody on 15,17 rts's
sorry for the dark pic.
i have these wheels on my c6, the problem is they are very big wheels, especially for the front.
20x12 in the rear and 19x10 in the front, oe sizes
fitting that kind of size on a fbody seems like a bit too much for those cars, fbodys are meant for 15-18, anything else looks a bit too odd imo. maybe it bc they were built back when the factory norm was 17s.
Heres my vette on cup wheels, and my fbody on 15,17 rts's
sorry for the dark pic.